Knowledge Base

Why Does My Dell J740 Inkjet Printer Fail to Work When Connected to My USB Print Server?


Verify bi-directional communication for the J740

The J740 requires bi-directional communications which may not be available with a USB print server.


Setup the J740 printer with a bi-directional capable connection or share across the network

If your USB print server does not support bi-directional communications you can connect the J740 printer directly to a system running Microsoft® Windows® XP or Windows 2000, and share the printer directly across the network.

NOTE

NOTE:

For information on sharing your Dell J740 printer across a home network, refer to Dell Knowledge Base Article:

Setting Up File and Printer Sharing


Dell Printer Additional Information

For additional assistance beyond what is provided in this article, you can E-mail or Chat with a Technical Support Representative at Dell support.






Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN130540

Last Date Modified: 07/06/2015 04:18 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.