Knowledge Base

How Do I Connect My Dell LCD TV To My Cable TV Converter Box?

Connect the Cable TV Converter to the Dell LCD TV

To connect the cable converter box to your Dell LCD TV, perform the following steps:

  1. From the cable TV converter box, connect the cable TV signal to the IN (put) plug on the converter, connect the OUT(put) plug from the converter to the 75 (ohm) plug on the TV.

Connecting the LCD TV to the Cable Converter Box

  1. Using the remote control, press the Power button to turn the unit on.

  2. Press the Menu button in the center of the remote control.
    The On Screen Display (OSD) Menu appears.

  3. Using the arrows that surround the Menu button, highlight the Setup listing.

  4. Press the Right arrow on the remote control to expand the Setup section.
    The Setup window appears.

  5. Using the Down arrow, highlight Tuner Mode.

  6. Press the Right arrow to expand the Tuner Mode section.
    The Tuner Mode window appears.

  7. Using the Down arrow, highlight the Cable listing.

  8. Press the Menu button to save the changes.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN36749

Last Date Modified: 12/01/2015 07:53 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.