Knowledge Base

How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers


Table of Contents:

  1. How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers

This article provides information on "How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers"


1. How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers

Scanner Registration is a process to align the scan area with the paper location. To manually adjust the scanner registration:

  1. Turn the printer off.
  2. Clean the scanner glass and backing material.
  3. Hold down 3 and 6 until the progress bar appears.
  4. Release the buttons.

    The printer performs a power‑on sequence, and then the Diagnostic menu appears.

  5. Touch the up or down arrow until Scanner Test appears.
  6. Touch Scanner Test.
  7. Touch the up or down arrow until Scanner Manual Registration appears.
  8. Touch Scanner Manual Registration.
  9. Touch the left and right arrows to change the settings.
  10. Touch Submit.

More information can be found in the 3333dn / 3335dn User's Guide.

If these steps do not correct the problem, please contact Dell Technical Support.


Back to Top




Article ID: SLN299144

Last Date Modified: 09/21/2015 07:52 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.