Knowledge Base

Configuring Do Not Allow Cluster Network Communication on This Network on iSCSI networks



Article Summary: This article provides information on best practices for Hyper-V clusters using iSCSI - configuring Do Not Allow Cluster Network Communication on This Network on iSCSI networks


Solution:

It is recommended to select Do no allow cluster network communication on this network on the iSCSI NIC's of a Hyper-V failover cluster server. Follow the steps in the solution to achieve this goal.

1. Open the Windows Failover Cluster Manager by opening Server Manager, click on Tools and click Failover Cluster Manager.

2. Choose Networks and expand the tree by clicking the arrow next to Networks.

3. Right-click on the the iSCSI-1 network and select Properties.



4. Ensure Do not allow cluster network communication on this network is selected.

5. Click OK to save the settings.

6. Repeat steps 3 through 5 on any remaining iSCSI networks.

Additional Information:

Additional information about best practices for Hyper-V failover clustering can be found on TechNet.




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN289398

Last Date Modified: 08/27/2014 08:52 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.