AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Linux utilities for the PERC 3/QC, PERC 3/DC, PERC 3/DCL and PERC 3/SC.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Changes from Previous Release of Linflash =========================== 1. To add support for verde based controller cards. 2. To provide same binary for 32-bit and 64-bit platforms.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Instructions for downloading and creating an applications diskette: =================================================================== You will need a formatted 3 1/2 inch floppy diskette for the following procedure. Download the file xxx.tar.gz to a temporary directory on your working system. Extract the file to the floppy disk as follows:
1. On a Linux system:
Type the following commands under a Linux command shell: mount /dev/fd0 /mnt/floppy tar xvzf -C /mnt/floppy
umount /mnt/floppy This will extract all the .rpms onto the floppy
Installation of Dellmgr ======================= 1.On a linux system To install, enter the following on the command line where the individual rpm are located.: rpm -ivh dellmgr-5.22-0.i386.rpm
This will install following two files in the /usr/sbin directory
dellmgr : Script to call configuration utility binary (dellmgr.bin) dellmgr.bin : Binary for configuration utility
After installation type "dellmgr" to start the utility. To uninstall the rpm: rpm -e dellmgr-5.22-0
Installation of Linflash ======================== Copy linflash-2.14-0.i386.rpm to local directory and type at prompt #rpm -i linflash-2.14-0.i386.rpm
You must copy the firmware image to the same directory for the linux flash utility to work. Create a diskette image of the firmware and copy the .rom file to the same directory as linflash.
To run the rpm type #linflash At the command prompt.
-r : Flash without asking for user input to flash adapter(s). -p : Prompt user for filename. Flash without checking for signatures. -s :Silent flash. First matching image file will be taken for each adapter. -i : Ignore the following files. These files will not be considered for flashing the matching controllers. -f : Force the following files To be flashed for the matching controller. In case more than one matching files are specified, the first one would be taken.
Installation procedure for Megamon =================================== To install, enter the following on the command line: rpm -ivh Megamon-3.6-0.i386.rpm
For email notification edit /var/log/raidmon.lst file. See details in the header section of this file
To start the monitoring service: /etc/rc.d/init.d/raidmon start
To stop the monitoring service: /etc/rc.d/init.d/raidmon stop
To restart the monitoring service: /etc/rc.d/init.d/raidmon [restart|reload]
To uninstall the rpm: rpm -e megamon-3.6-0
Installation procedure for DELL PERC SNMP Agent for Linux ========================================================= If RPM support is there, install DELL PERC SNMP Agent using rpm -i percsnmp-4.06-1.i386.rpm
Note: If you have installed previous release of percsnmp please uninstall the older one,by running rpm -e percsnmp Then proceed to install the new release.
If there is no support for RPM , follow the following procedures:
Untar the DELL PERC SNMP Agent tar package and then