Dell Elite Hard Drive Diagnostics, 5.30.20
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.DOS-Elite SCSI HDD Diagnostics
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
This release provides updated ASPI driver for Adaptec firmware version 2.8
Read MoreVersion
5.30.20, 5.30.20
Release date
13 May 2004
Download Type
Diagnostics Utility
Category
SCSI RAID
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
File Format: One or more self extracting disk images inside of a self extracting zip
File Name: BR77543.exe
File Size: 953.16 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Microsoft MS-DOS
Looking for a different OS? View the list of Dell supported operating systems
Installation instructions
Custom Instructions for BR77543.exe:
Note: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Installation
1. Insert the diskette created above into the target system.
2. Reboot the system to start the hard drive diagnostic.
3. Select the appropriate SCSI controller and press enter.
4. After scanning the drive(s), the disclaimer is displayed. Accept the terms (press "Y") to continue.
5. Use the menu selection(s) to select and test the drive(s).
6. Refer to “Using ELITE” in the “readme.txt” file on the diskette for further instructions.
Note: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Installation
1. Insert the diskette created above into the target system.
2. Reboot the system to start the hard drive diagnostic.
3. Select the appropriate SCSI controller and press enter.
4. After scanning the drive(s), the disclaimer is displayed. Accept the terms (press "Y") to continue.
5. Use the menu selection(s) to select and test the drive(s).
6. Refer to “Using ELITE” in the “readme.txt” file on the diskette for further instructions.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.