AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
Novell Netware Drivers for the 3C980c Adapter.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Netware 4.11 with Service Pack 6 or higher ==========================================
Service Pack 6 or higher is required for proper operation of the failover mechanism for the 3C980 Server NIC with Netware 4.11. Before you load the SE.NLM, you should copy NEB.NLM, ODINEB.NLM, TCPIP.NLM, MSM.NLM, and ETHERTSM.NLM from the \NWSERVER directory on the 3Com EtherLink Server CD into the server SYSTEM directory. Otherwise, failover performance may be adversely affected.
NetWare 4.11 Server Abend observed when SE.NLM and NWIP.NLM is loaded. ======================================================================
The concurrent use of Novell's NWIP.NLM and the 3Com SE.NLM is not supported. Use can cause NetWare 4.11 to abend. If TCP/IP support is needed for NetWare 4.11, ensure the latest Service Pack is installed, and use Novell's TCPIP.NLM instead of NWIP.NLM.
Netware 4.2 ===========
Before you load the 3C980.LAN or SE.NLM, you should copy TCPIP.NLM, MSM.NLM, and ETHERTSM.NLM from the \NWSERVER directory on the 3Com EtherLink Server CD into the server SYSTEM directory. You may want to check if NEB.NLM and ODINEB.NLM located in SYSTEM directory. If not, you should copy NEB.NLM and ODINEB.NLM to the SYSTEM directory. Otherwise, failover performance may be adversely affected.
Netware 5.0 ===========
Service Pack 2 or higher is required if hardware checksumming is enabled.
NetWare 5.1 ===========
The provided NetWare LAN driver and support files are compliant with both NetWare 5.0 and 5.1. When installing this product for use with Netware 5.1, use the NetWare 5.0 installation instructions.
Dell Technologies raadt aan om deze update te bekijken om te bepalen of deze van toepassing is op uw systeem. De update bevat wijzigingen die alleen invloed hebben op sommige configuraties, of bevat nieuwe functies die al dan niet op uw omgeving van toepassing zijn.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Netware 4.11 with Service Pack 6 or higher ==========================================
Service Pack 6 or higher is required for proper operation of the failover mechanism for the 3C980 Server NIC with Netware 4.11. Before you load the SE.NLM, you should copy NEB.NLM, ODINEB.NLM, TCPIP.NLM, MSM.NLM, and ETHERTSM.NLM from the \NWSERVER directory on the 3Com EtherLink Server CD into the server SYSTEM directory. Otherwise, failover performance may be adversely affected.
NetWare 4.11 Server Abend observed when SE.NLM and NWIP.NLM is loaded. ======================================================================
The concurrent use of Novell's NWIP.NLM and the 3Com SE.NLM is not supported. Use can cause NetWare 4.11 to abend. If TCP/IP support is needed for NetWare 4.11, ensure the latest Service Pack is installed, and use Novell's TCPIP.NLM instead of NWIP.NLM.
Netware 4.2 ===========
Before you load the 3C980.LAN or SE.NLM, you should copy TCPIP.NLM, MSM.NLM, and ETHERTSM.NLM from the \NWSERVER directory on the 3Com EtherLink Server CD into the server SYSTEM directory. You may want to check if NEB.NLM and ODINEB.NLM located in SYSTEM directory. If not, you should copy NEB.NLM and ODINEB.NLM to the SYSTEM directory. Otherwise, failover performance may be adversely affected.
Netware 5.0 ===========
Service Pack 2 or higher is required if hardware checksumming is enabled.
NetWare 5.1 ===========
The provided NetWare LAN driver and support files are compliant with both NetWare 5.0 and 5.1. When installing this product for use with Netware 5.1, use the NetWare 5.0 installation instructions.
Hulp nodig bij problemen met de netwerkverbinding?
Zoek een oplossing in de Dell gids voor probleemoplossing en gebruik van het netwerk.