Broadcom NetXtreme I and II Network Device Firmware 7.10.18
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This release provides updated network controller firmware for the Broadcom NetXtreme devices. This release should be used with the Broadcom 18.4.2 device drivers.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: - Unable to establish link on all four 57840 bNDC ports at 1Gbps - 57840 rNDC may experience PCIe correctable errors if linked at PCIe Gen2 - System with Broadcom 10G NDC may RSOD when entering device settings in BIOS - Changing the failover network for iDRAC causes the connection to the iDRAC to fail when the Virtual Console is open and Virtual Media attached - 57840 NDC may lose partition bandwidth settings upon entering Lifecycle Controller - IscsiInitiator 1stTgt and 2ndTgt parameter not getting set for 10gig - PHY firmware upgrade failure for 10GBT adapters - UEFI driver unload on 5771X devices causing bus fatal error
Enhancements: - Added support for Dell 13G servers. - Added FCoE support for 10G BASE-T adapters.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Dell Update Package Instructions Download 1. Click Download Now to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.