English | Français
Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell OpenManage Connection for CA Unicenter, v.3.2, A00
Version 3.2 of the Connection is a Complete Install for CA Unicenter NSM r11 and is a Service Pack for Dell OpenManage Connection for CA Unicenter 3.0 on CA Unicenter versions 3.0, 3.1.
Release Date: 07/06/2006
Importance: Recommended
Version: 3.2,A00

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

CA32A00.exe

Description: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Download Type: HTTP
File Size: 1MB

File Format: Rel-Notes-Text Download File Download File
File Name:

CA32RA00.exe

Description: This format consists of an archive of text files used to provide help and procedural information to the customer.
Download Type: HTTP
File Size: 29KB

File Format: User-Guide Download File Download File
File Name:

CA32UA00.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files.
Download Type: HTTP
File Size: 67KB

Previous Versions

No previous version available.

Description

Version 3.2 of the Connection is a Complete Install for CA Unicenter NSM r11 and is a Service Pack for Dell OpenManage Connection for CA Unicenter 3.0 on CA Unicenter versions 3.0, 3.1.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

* The Dell OpenManage Connection for CA Unicenter version 3.0 must be installed prior to the installation of the Service Pack for CA Unicenter versions 3.0, 3.1. For CA Unicenter NSM r11, Dell OpenManage Connection for CA Unicenter version 3.0 is not required. * The Service Pack only needs to be installed on the Distributed State Machine (DSM) server. The Service Pack does not apply to the Event Manager or WorldView components. * This patch cannot be removed without uninstalling the Connection.

Compatibility

Systems
PowerEdge 1300
PowerEdge 1400SC
PowerEdge 1500SC
PowerEdge 1550
PowerEdge 1600SC
PowerEdge 1650
PowerEdge 1655MC
PowerEdge 1800
PowerEdge 1850
PowerEdge 1855
PowerEdge 1900
PowerEdge 1950
PowerEdge 1955
PowerEdge 2300
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500
PowerEdge 2500SC
PowerEdge 2550
PowerEdge 2600
PowerEdge 2650
PowerEdge 2800
PowerEdge 2850
PowerEdge 2900
PowerEdge 2950
PowerEdge 2970
PowerEdge 300
PowerEdge 350
PowerEdge 4300
PowerEdge 4350
PowerEdge 4400
PowerEdge 4600
PowerEdge 500SC
PowerEdge 600SC
PowerEdge 6300
PowerEdge 6350
PowerEdge 6400
PowerEdge 6450
PowerEdge 6600
PowerEdge 6650
PowerEdge 6800
PowerEdge 6850
PowerEdge 700
PowerEdge 750
PowerEdge 830
PowerEdge 8450
PowerEdge 850
Operating Systems
MS Windows Server 2003
MS Windows NT 4.0
MS Windows 2000

Applies to

  • OpenManage Connection for CA Unicenter

Fixes & Enhancements

* Version 3.2 of the Connection supports the new CA Unicenter framework NSM r11 on systems running supported Microsoft Windows operating systems. * Version 3.2 of the Connection also supports CA Unicenter versions 3.0 and 3.1 on systems running supported Microsoft Windows operating systems. * Version 3.2 of the Connection is a Service Pack for versions 3.0 and 3.1 of Connection. * Version 3.2 of the Connection contains all the fixes and event support provided in patches 3.0.0.0.B, 3.0.0.0.C, and 3.1. * Version 3.2 of Connection supports Dell OpenManage Server Administrator versions 1.6 - 5.0 and enhanced Storage Management Service 2.0. * Version 3.2 of Connection supports Dell OpenManage Array Manager versions 3.4 - 3.7. * Version 3.2 of the Connection supports PET (Platform Event Traps) for Dell(TM) PowerEdge(TM) "x8xx" and “x9xx” systems with a baseboard management controller (BMC).

Installation instructions

            
Custom Instructions for CA32RA00.exe: 

1. Download the file (self-extracting executable) above to a directory on your hard drive.
2. Navigate to the location where the file was downloaded and double-click the executable.  By default, the files will be extracted to the following folder: "C:\Connection_for_CA_3.2_ReleaseNotes". You may select a different location for file extraction by clicking the browse button and entering a path other than the default.
3. After extracting, navigate to the extraction target directory and refer to the readme.
Custom Instructions for CA32UA00.exe:

1. Download the file (self-extracting executable) above to a directory on your hard drive.
2. Navigate to the location where the file was downloaded and double-click the executable.  By default, the files will be extracted to the following folder: "C:\Connection_for_CA_3.2_UsersGuide". You may select a different location for file extraction by clicking the browse button and entering a path other than the default.
3. After extracting, navigate to the extraction target directory and refer to the UsersGuide
Custom Instructions for CA32A00.exe: 

1. Download the file (self-extracting executable) above to a directory on your hard drive. 
2. Navigate to the location where the file was downloaded and double-click the executable.  By default, the files will be extracted to the following folder: "C:\Connection_for_CA_3.2". You may select a different location for file extraction by clicking the browse button and entering a path other than the default.
3. Version 3.2 of the Connection is a complete install for CA Unicenter NSM r11 and is a Service Pack for Dell OpenManage Connection for CA Unicenter 3.0 on CA Unicenter versions 3.0, 3.1. After extracting, navigate to the extraction target directory and double-click setup.exe to install Service Pack 3.2 for Dell OpenManage Connection for CA Unicenter 3.0.

NOTE: For CA Unicenter versions 3.0 and 3.1, Dell OpenManage Connection for CA Unicenter version 3.0 must be installed prior to the installation of the Service Pack.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
6fa6b1c42b86517949f5a560ed5ad19c
CA32A00.exe
SHA1:
Not Available
CA32A00.exe
SHA-256:
Not Available
CA32A00.exe

By downloading, you accept the terms of the Dell Software License Agreement.