Adaptec PERC2, PERC2/Si, PERC3/Si, PERC3/Di, v. 2.6.0.3499, A09
AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This is the version 2.6-0 Command Line Interface (CLI) for Netware version 4.2 and 5.X. for PERC 2, PERC 2/Si, PERC 3/Si, and PERC 3/Di controllers.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
In previous versions, the integrated kernel could crash if a user used the CLI utility to ask for information about a disk that did not exist. This has been fixed.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
1. Download the file (A9NWAPPS.ZIP) to a directory on your hard drive 2. Use unzip to unzip the file. 3. Follow the following instructions. __________________________________________________________________ 3.0 Upgrading the Netware CLI from the local server
Follow the following steps to upgrade the CLI application on the Netware server.
* From server console down the server * Unzip contents of the 26NWAPPS.ZIP file to a temporary directory on the hard disk. * Bring up the server * From command console run
load C:\temp\nwsetup.nlm
(where C:\temp is the name of temporary directory where contents of 26NWAPPS.ZIP file were unzipped in earlier steps)
* Follow instructions on the screen from nwsetup.nlm
___________________________________________________________ 4.0 Upgrading the Netware CLI from a Windows client
Follow the following steps to upgrade From a Windows client attached to the NetWare Server
* Copy unzipped contents of the 26NWAPPS.ZIP file to a directory on the server. Note: don not copy these files to sys:system directory
* From command console run
load directory path\nwsetup.nlm
(where directory path points to the directory where contents of 26NWAPPS.ZIP file were copied in earlier steps)
* Follow instructions on the screen from nwsetup.nlm