Dell PowerConnect 6224, PowerConnect 6248, v.V1.0.4.3, A04
* This is Maintainence firmware release v1.0.4.3 for the Dell PowerConnect 62xx Ethernet switch.
* This firmware is transferable to the switch via a TFTP server.
| Release Date: | 8/31/2007 |
| Importance: | Recommended |
| Version: | V1.0.4.3,A04 See Previous Versions |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
PowerConnect_62XX_1043.zip |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 8MB | |
| File Format: | Plain-Text |
Download File
|
| File Name: |
PC_62XX_v1043_ReadMe.txt |
|
| Description: | This file format contains plain text which can be viewed with a standard text editor. | |
| Download Type: | HTTP | |
| File Size: | 4KB | |
Previous Versions
|
v3.3.5.5, A29
<ul><li><b>Vendor Version :</b> v3.3.5.5</li><li><b>Dell Version :</b> A29</li></ul>
|
11/20/2012 10:08:32 PM |
|
PC6200v3.3.4.1, A28
<ul><li><b>Vendor Version :</b> PC6200v3.3.4.1</li><li><b>Dell Version :</b> A28</li></ul>
|
7/25/2012 3:26:49 PM |
|
PC6200v3.3.3.3, A27
<ul><li><b>Vendor Version :</b> PC6200v3.3.3.3</li><li><b>Dell Version :</b> A27</li></ul>
|
4/3/2012 3:07:46 PM |
|
PC6200v3.3.2.3, A26
<ul><li><b>Vendor Version :</b> PC6200v3.3.2.3</li><li><b>Dell Version :</b> A26</li></ul>
|
1/12/2012 11:38:00 AM |
|
3.3.1.10, A25
<ul><li><b>Vendor Version :</b> 3.3.1.10</li><li><b>Dell Version :</b> A25</li></ul>
|
8/8/2011 4:54:44 PM |
|
3.2.1.3, A23
<ul><li><b>Vendor Version :</b> 3.2.1.3</li><li><b>Dell Version :</b> A23</li></ul>
|
6/20/2011 7:28:39 AM |
|
4.4.0.21, A16
<ul><li><b>Vendor Version :</b> 4.4.0.21</li><li><b>Dell Version :</b> A16</li></ul>
|
5/26/2011 2:06:01 PM |
|
3.2.1.3, A22
<ul><li><b>Vendor Version :</b> 3.2.1.3</li><li><b>Dell Version :</b> A22</li></ul>
|
1/21/2011 9:25:28 AM |
|
3.2.0.10, A21
<ul><li><b>Vendor Version :</b> 3.2.0.10</li><li><b>Dell Version :</b> A21</li></ul>
|
1/14/2011 3:32:24 PM |
|
3.2.0.9, A19
<ul><li><b>Vendor Version :</b> 3.2.0.9</li><li><b>Dell Version :</b> A19</li></ul>
|
1/14/2011 3:06:39 PM |
|
4.3.0.27, A15
<ul><li><b>Vendor Version :</b> 4.3.0.27</li><li><b>Dell Version :</b> A15</li></ul>
|
12/14/2010 10:20:52 AM |
|
3.2.0.7, A18
<ul><li><b>Vendor Version :</b> 3.2.0.7</li><li><b>Dell Version :</b> A18</li></ul>
|
5/19/2010 4:36:13 PM |
|
2.2.0.3, A17
<ul><li><b>Vendor Version :</b> 2.2.0.3</li><li><b>Dell Version :</b> A17</li></ul>
|
4/12/2010 11:43:42 AM |
|
2.1.1.4, A12
<ul><li><b>Vendor Version :</b> 2.1.1.4</li><li><b>Dell Version :</b> A12</li></ul>
|
9/30/2008 10:17:24 AM |
|
2.1.0.13, A11
<ul><li><b>Vendor Version :</b> 2.1.0.13</li><li><b>Dell Version :</b> A11</li></ul>
|
6/3/2008 10:22:14 PM |
|
2.0.1.12, A10
<ul><li><b>Vendor Version :</b> 2.0.1.12</li><li><b>Dell Version :</b> A10</li></ul>
|
5/6/2008 1:13:57 PM |
|
2.0.0.12, A07
<ul><li><b>Vendor Version :</b> 2.0.0.12</li><li><b>Dell Version :</b> A07</li></ul>
|
2/18/2008 5:23:07 PM |
|
V1.0.2.6, A03
<ul><li><b>Vendor Version :</b> V1.0.2.6</li><li><b>Dell Version :</b> A03</li></ul>
|
6/25/2007 1:07:47 PM |
|
1.0.0.27, A01
<ul><li><b>Vendor Version :</b> 1.0.0.27</li><li><b>Dell Version :</b> A01</li></ul>
|
4/18/2007 2:35:02 PM |
Description
* This is Maintainence firmware release v1.0.4.3 for the Dell PowerConnect 62xx Ethernet switch.
* This firmware is transferable to the switch via a TFTP server.
Level of Importance:Recommended
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).
Important Information
**Please read the Adobe PDF documents enclosed in the ZIP download.**
Compatibility
| Systems PowerConnect 6248 PowerConnect PowerConnect 62XX | Operating Systems Not Applicable |
Applies to
- KIT,CHAS,SWT,24PRT,6224INTL,V2
- PowerConnect 6248
Fixes & Enhancements
This is a mainataince Release which addresses the field issues and added on new feature basewd on customer request
- When the exported switch configuration is being downloaded to the switch via tftp server, Errors are reported during configuration validation
- When the VLAN1 IP address is changed using the CLI, the default-gateway disappears.
- In the WebUI for the 62xx, the “Time” column in the RMON Event Control screen is showing sysUpTime (seconds that the switch has been running). It should be showing the last time an event was generated. The CLI is working correctly
- If no SFPs are plugged in, attempting to run an optical transceiver diagnostic will restart the switch.
- If the switch is configured to use Radius on MS IAS for authentication, a Telnet or HHTP user can only gain level 1 access.
- It is not possible to delete a backup image while the switch is being used in a stacked configuration.
- Whenever trunk mode is configured, the following line appears in the config automatically. “switchport trunk allowed vlan remove 1”
- Added debug shell commands to improve serviceability.
New Feature added
- IGMP Snooping Querier
Installation Instructions
Custom Instructions for PC_62XX_v1043_ReadMe.txt:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
6. Review the readme file to complete installation.
Custom Instructions for PowerConnect_62XX_1043.zip:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
6. Review the readme file to complete installation.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
a8385b44234425f7a07f16e69e705314
|
PC_62XX_v1043_ReadMe.txt
|
|
SHA1:
|
Not Available
|
PC_62XX_v1043_ReadMe.txt
|
|
SHA-256:
|
Not Available
|
PC_62XX_v1043_ReadMe.txt
|
My Download List
0
files in my list
Drivers Quick Links