Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell Battery Calibration, v. 1.0, A01
Inspiron 7500 Battery Recalibration Utility [Version A00]
Release Date 8/15/2000
Importance: Optional
Version: 1.0,A01

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

i75brca0.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 19KB

Previous Versions

No previous version available.

Description

Inspiron 7500 Battery Recalibration Utility [Version A00]

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Important Information

WARNING: This program takes approximately 10 hours to run! You should run this program at night. 1. Connect AC power to the system. 2. Ensure that your primary battery is installed in the system. **Note that this program can not calibrate a battery in the secondary position (if available on your Inspiron)** 3. From a Windows DOS Prompt, run the BATRCAL program. 4. The program will run but will not provide any messages, feedback, or indication that anything is happening. You may close the DOS prompt. 5. Leave your system powered on overnight. Running this program will result in a forced recalibration of the main battery. The forced recalibration will charge the battery to a full state, then internally disconnect the AC power and fully discharge the battery, then recharge the battery. This will cause a suspend of the system when the battery reaches a discharged state, but the battery will be recharged.

Compatibility

Systems
Inspiron 7500
Operating Systems
Not Applicable

Applies to

  • Battery Calibration

Installation instructions

            

Hard Drive Installation (via WinZip) with HTML Pop-Up Window for i75brca0.exe Download 1.Click Download Now, to download the file. 2.When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears. 3.From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4.If the Download Complete window appears, click Close. The file name icon appears on your desktop. Install 1.Double-click the new icon on the desktop labeled i75brca0.exe. The Self-Extractor window appears. 2.Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\R20542. 3.Leave all of the default settings and click Unzip or OK. If the directory doesn't exist, you'll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R20542 files were extracted. 4.Click OK. Follow the on-screen installation instructions in the window. HTML Pop-Up With Install Now Button 1.The Dell Software Installation Documentation window appears. 2.Click the Install Now button. A File Download window appears. 3.Click Run this program from its current location and click OK. The Security Warning window appears. 4.Click Yes. The InstallShield Wizard window appears. 5.Follow the on-screen instructions.

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
i75brca0.exe
SHA1:
Not Available
i75brca0.exe
SHA-256:
Not Available
i75brca0.exe

By downloading, you accept the terms of the Dell Software License Agreement.