Dell Support Drivers & Downloads Driver File Formats

Driver Details

Dell iDRAC Monolithic release V1.95
iDRAC6 V1.95
Release Date 2/21/2013
Importance: Urgent
Version: 1.95,A00 See Previous Versions

The following formats are available for the file you have selected

File Format: Application Download File Download File
File Name:


Description: Application
Download Type: HTTP
File Size: 48MB

File Format: Rel-Notes-PDF Download File Download File
File Name:


Description: This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
Download Type: HTTP
File Size: 120KB

File Format: Update Package for Microsoft® Windows® Download File Download File
File Name:


Description: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Download Type: HTTP
File Size: 57MB

Previous Versions

1.90, A00
<ul><li><b>Vendor Version :</b> 1.90</li><li><b>Dell Version :</b> A00</li></ul>
7/16/2012 1:47:48 AM
1.85, A00
<ul><li><b>Vendor Version :</b> 1.85</li><li><b>Dell Version :</b> A00</li></ul>
2/29/2012 1:41:55 AM


iDRAC6 V1.95

Level of Importance:Urgent

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.


Dell DR4000
Dell DX6000
Dell DX6000G
Dell DX6012S
PowerEdge R210
PowerEdge R210 II
PowerEdge R310
PowerEdge R410
PowerEdge R415
PowerEdge R510
PowerEdge R515
PowerEdge R610
PowerEdge R710
PowerEdge R715
PowerEdge R810
PowerEdge R815
PowerEdge R910
PowerEdge T310
PowerEdge T410
PowerEdge T610
PowerEdge T710
PowerVault DL2100
PowerVault DL2200
PowerVault DL2200 CommVault
PowerVault NX200
PowerVault NX300
PowerVault NX3000
PowerVault NX3100
Operating Systems
Not Applicable

Applies to

  • iDRAC6

Fixes & Enhancements

Enhancements: - Creating a partition from an image failed intermittently with Dell supported 8 GB SD card. - Cannot create Certificate Signing Request (CSR) with remote and local RACADM. - Cannot perform firmware update using the Web interface with Internet Explorer 10 browser. - Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string. - RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled. - Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser. - If the user password has (?) character, access is denied for WSMAN commands. - In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration. - If is ON on the management station and Virtual Console is launched, and then if any letter is pressed small case letter isdisplayed. If is OFF and any letter is pressed, then Capital letter is displayed. - The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command. - In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply. - Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present. - Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version. - Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.

Installation instructions


1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.            


To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.

By downloading, you accept the terms of the Dell Software License Agreement.