NEC NR-7900A HH 24X CD-RW, v.109B, A01

AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Firmware update for NEC NR-7900A 24x CD-RW drive; Dell P/n: 6J118, 7J385
To view all drivers for your Dimension 8250, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

D6J11801.exe | 465 KB
This is a large file. Depending on your connection speed, it may take some time to download.

File Format: One or more self extracting disk images inside of a self extracting zip
File Name: D6J11801.exe
File Size: 465 KB
Format Description
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

This firmware resolved an issue where the NEC NR-7900A drive has problem
writing on Sony 32x CD-R Media
Read More

Version

109B, A01

Release date

19 Nov 2002

Download Type

Firmware

Category

Removable Storage

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.

Additional details

Show All | Hide All
NR-7900A HH 24X CD-RW
Default Instructions for D6J11801.exe:

Follow these steps to install.

You will need a blank formatted 1.44MB floppy disk to proceed with the
flashing process.

1. Download the D6J11801.exe file from the Dell website to a known
directory.
2. Place a known good formatted floppy disk in your floppy disk drive.
3. Navigate to the directory and Double-click on the file you just
downloaded.
4. Follow the on screen instructions to create a flash floppy disk.
5. Once the flash disk has been created, restart your computer with the
floppy in drive A. The flash process will begin automatically.
6. Follow the instructions provided by the flash disk.
7. Once the flash process has been completed successfully, remove the
diskette and reboot the system.
*** Make sure that there are no power interruptions during the flash
process***

Drivers help and tutorials