Dell ControlVault Firmware
DDPA 2.3 release supporting ControlVault Firmware for DDPA
| Release Date: | 3/6/2013 |
| Importance: | Recommended |
| Version: | 23.7.009.0A,A28 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
CV_Setup_46KM0_A28_ZPE.exe |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 5MB | |
Previous Versions
No previous version available.
Description
DDPA 2.3 release supporting ControlVault Firmware for DDPA
Level of Importance:Recommended
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).
Important Information
Note: this A28 USH Firmware release supports production USH hardware CustID 7 only.
REQUIREMENTS
-----------------
The latest Dell Data Protection | Access must be installed in order for the USHUPGRADE to
communicate with the ControlVault. "Application configuration is incorrect" is a result of an old driver pack being installed.
The USHUPGRADE is not a stand alone application. It requires all files
contained in the firmware directory to update the USH firmware.
The files USHUPGRADE uses depend on the particular system.
The USHUPGRADE can only be run by a user with Administrator privileges.
NOTE: If running from Vista with User Account Control (UAC) enabled,
the USHUPGRADE must be run as an Administrator.
-----------------
GETTING STARTED
-----------------
Please refer to the \firmware\readme.txt file for advanced command line
options and result codes
Compatibility
| Systems Latitude E4300 Latitude E4310 Latitude E6220 Latitude E6230 Latitude E6320 Latitude E6330 Latitude E6400 Latitude E6400 ATG Latitude E6410 Latitude E6410 ATG Latitude E6420 Latitude E6420 ATG Latitude E6420 XFR Latitude E6430 Latitude E6430 ATG Latitude E6430s Latitude E6500 Latitude E6510 Latitude E6520 Latitude E6530 Latitude XFR E6400 Latitude XT3 Precision M4500 Precision M4600 Precision M4700 Precision M6500 Precision M6600 Precision M6700 | Operating Systems MS Windows 7 32-bit MS Windows 7 64-bit MS Windows 8 32-bit MS Windows 8 64-bit MS Windows Vista 32-bit MS Windows Vista 64-bit MS Windows XP |
Applies to
- ControlVault Firmware
Fixes & Enhancements
After download see Readme release notes for A28 release
Installation Instructions
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\46KM0.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn't exist, you'll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\46KM0 files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\46KM0)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The TPM setting must be set to enabled/deactivated in BIOS for the USH firmware to be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\46KM0) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run DOSUPDAT.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Windows XP.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\46KM0\firmware)
11. Double click on ushupgrade.exe
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
-------------------------------------------------
Installation/Update From Vista/Win7/Win8.
-------------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\46KM0\firmware)
11. Right click on ushupgrade.exe and select Run As Administrator.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
SHA1:
|
585316166be068bf1d5a4c8c81b39f30
f4ffeffec5808bd5ebf9bcec2fd55e27666d7b00
|
CV_Setup_46KM0_A28_ZPE.exe
CV_Setup_46KM0_A28_ZPE.exe
|
My Download List
0
files in my list
Drivers Quick Links