Instructions for RAID_DRVR_WIN_R294479.EXE:
Download 
1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 
Installation 
1. Browse to the location where you downloaded the file and double-click the new file. 
2. Read over the release information presented in the dialog window. 
3. Download and install any prerequisites identified in the dialog window before proceeding. 
4. Click the Install button. 
5. Follow the remaining prompts to perform the update. 
Instructions for R294479.txt:
1) Click Download now.
   The File Download window appears.
2) Click the Save button.
   The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
   A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
   The Dell Bios Release Notes window appears.
Instructions for DELL_MULTI-DEVICE_A02_R294479.EXE
Download 
1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 
Extract Files 
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 
2. Click Continue. 
3. Specify the location to unzip the files. 
4. Click on the OK button to extract files.
   After the files are extracted the message all files were successfully unzipped will appear. 
5. Click the OK button to exit from the installer. 
To build the installation media these files should be copied to a blank floppy diskette or USB key.
Installing the Driver during Operating System Installation
1. Power on the system and boot to the Microsoft Windows Server CD.
2. When the message "Press F6 if you need to install a third party SCSI  
   or RAID driver" appears, press the 'F6' key immediately.
   Within a few minutes, a screen appears asking for driver to support 
   the additional controllers in the system.
3. Press the 'S' key.
   The system prompts for the driver diskette to be inserted.
4. Insert the driver diskette in the floppy drive (or the USB key on the 
   USB port) and press the 'Enter' key.
   A list of PERC drivers appears.
5. Select the appropriate driver for the installed controller/OS and 
   press the 'Enter' key to load the driver.
6. Press the 'Enter' key again to continue the installation process. 
Installing a Windows Driver for a New RAID Controller
Perform the following steps to configure the driver when you add the RAID controller to a system that already has Windows installed.
1. Power down the system.
2. Install the new RAID controller in the system.
   Refer to Hardware Installation for detailed instructions on installing 
   and cabling the RAID controller in the system.
3. Power on the system.
   The Windows operating system should detect the new controller and display  a message to inform the user.
4. The Found New Hardware Wizard screen pops up and displays the detected  hardware device.
5. Click on "Next".
6. On the Locate device driver screen, select "Search for a suitable driver for my device" and click Next.
7. Insert the appropriate driver diskette or USB key and select that device  on the Locate Driver Files screen.
8. Click Next.
9. The wizard detects and installs the appropriate device driver for the new RAID controller.
10.Click Finish to complete the installation.
11.Reboot the server.