Dell Lifecycle Controller Repair Package, v.1.0.0, A00
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.The Unified Server Configurator (USC) repair package restores embedded tools
and utilities in the event of a hardware failure or flash memory corruption. Such
failures can occur for many reasons, including power loss or interruption of an
update process.
and utilities in the event of a hardware failure or flash memory corruption. Such
failures can occur for many reasons, including power loss or interruption of an
update process.
To view all drivers for your OEMR R710, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
USC_1.0.0_Rep_OEM_A00.usc | 4.37 MB>
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
Unified Server Configurator Repair Package
File Name:
USC_1.0.0_Rep_OEM_A00.usc
File Size:
4.37 MB
Format Description
This file is the Unified Server Configurator Repair Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
0ff94e98ff448f8ad931b14a1f3bd4f1
SHA1:
Not available
SHA-256:
Not available
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Version
1.0.0, A00
Release date
01 Apr 2009
Download Type
Applications
Category
Lifecycle Controller – Legacy
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
1.1.0, A0030 Jun 2009
1.1.0, A0015 Apr 2009
Not Applicable
Looking for a different OS? View the list of Dell supported operating systems
Custom Instructions for USC_1.0.0_Rep_OEM_A00.usc:
1. Download the file (.usc) onto your storage media (USB key or hard drive).
2. Connect to iDRAC on your system using the iDRAC web interface. For more information on the iDRAC, see the iDRAC User's Guide.
3. From the iDRAC web interface, click "Remote Access".
4. Select the "Update" tab, and then browse to the image you downloaded in step 1.
5. Click "Next", and then click "OK" to confirm the upload. Allow the process to complete before you continue to step 6.
6. Reboot your system, and then press the key to enter the Unified Server Configurator interface.
7. Select "Launch Platform Update" to complete the installation of all recommended updates.
1. Download the file (.usc) onto your storage media (USB key or hard drive).
2. Connect to iDRAC on your system using the iDRAC web interface. For more information on the iDRAC, see the iDRAC User's Guide.
3. From the iDRAC web interface, click "Remote Access".
4. Select the "Update" tab, and then browse to the image you downloaded in step 1.
5. Click "Next", and then click "OK" to confirm the upload. Allow the process to complete before you continue to step 6.
6. Reboot your system, and then press the
7. Select "Launch Platform Update" to complete the installation of all recommended updates.
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.