Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell PERC H200 Integrated Firmware, v.07.02.44.00, A05
This package includes firmware version 07.02.44.00 for use with Dell PERC H200 Integrated Controllers
Release Date 1/12/2012
Importance: Urgent
Version: 07.02.44.00,A05 See Previous Versions

The following formats are available for the file you have selected

File Format: Rel-Notes-Text Download File Download File
File Name:

R301106.txt

Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 2KB

Previous Versions

07.02.42.00, A04
<ul><li><b>Vendor Version :</b> 07.02.42.00</li><li><b>Dell Version :</b> A04</li></ul>
1/12/2012 5:53:25 AM

Description

This package includes firmware version 07.02.44.00 for use with Dell PERC H200 Integrated Controllers

Level of Importance:Urgent

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.

Important Information

- When installing an OS, be sure to select a Boot Device in CTRL+C. In CTRL+C, under SAS Topology, scroll down to the desired Physical Disk or Virtual Disk and enter ALT+B to select the device as your Boot Device. - Resynch, Background Init and Consistency Check processes will always occur serially. - When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details. - When adding a PERC H200 controller to a system, either by physically adding an adapter or by enabling the integrated SAS controller in the system BIOS, the new controller may need to be added to the controller boot order in the PERC H200 BIOS configuration Utility.

Compatibility

Systems
Dell DX6012S
External OEMR R910
PowerEdge R510
PowerEdge R515
PowerEdge R910
PowerEdge T710
PowerVault DL2200
PowerVault DL2200 CommVault
Operating Systems
Not Applicable

Applies to

  • PERC H200 Adapter
  • PERC H200 Integrated

Fixes & Enhancements

Fixes: - Corrects a potential scenario where a drive may repeatedly fail during i/o - Fixes an issue where the server can error with a RSOD when in UEFI mode.

Installation instructions

            
Performing the Firmware Upgrade

NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.

1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.

Zip pack:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your 
hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the 
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully 
unzipped will appear.
5. Click the OK button to exit from the installer.

Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.


Windows Update Package:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to 
your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window 
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Linux Update Package:

Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the 
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before 
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.

GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
4fcc65a2cfb874a319857822f77197b9
R301106.txt
SHA1:
Not Available
R301106.txt
SHA-256:
Not Available
R301106.txt

By downloading, you accept the terms of the Dell Software License Agreement.