Dell PowerConnect 3248, v. 1.31, A01
General Discription
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
| Release Date: | 7/25/2002 |
| Importance: | Optional |
| Version: | 1.31,A01 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
PWRNTSM.zip |
|
| Description: | This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory. | |
| Download Type: | HTTP | |
| File Size: | 5MB | |
Previous Versions
No previous version available.
Description
General Discription
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
Level of Importance:Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.
Important Information
"null"
Compatibility
| Systems PowerConnect 3248 | Operating Systems Not Applicable |
Applies to
- PowerConnect 3248
Fixes & Enhancements
None
Installation Instructions
*****This file contains a compressed (or zipped) set of files. You will
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.
Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.
NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:
1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
Not Available
|
PWRNTSM.zip
|
|
SHA1:
|
Not Available
|
PWRNTSM.zip
|
|
SHA-256:
|
Not Available
|
PWRNTSM.zip
|
My Download List
0
files in my list
Drivers Quick Links