Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
PowerConnect,M8024S,M8024,V4.2.2.3,A26
This firmware release is a maintenance release for the M8024 and M8024S version of PowerConnect switches and includes only bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
Release Date 5/11/2012
Importance: Recommended
Version: v4.2.2.3,A26 See Previous Versions

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

PCM8024v4.2.2.3a26.zip

Description: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Download Type: HTTP
File Size: 20MB

File Format: Plain-Text Download File Download File
File Name:

PCM8024ReadMev4.2.2.3a26.txt

Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 3KB

Previous Versions

4.2.1.3, A25
<ul><li><b>Vendor Version :</b> 4.2.1.3</li><li><b>Dell Version :</b> A25</li></ul>
2/16/2012 3:46:48 PM
4.2.0.4, A24
<ul><li><b>Vendor Version :</b> 4.2.0.4</li><li><b>Dell Version :</b> A24</li></ul>
1/14/2012 8:39:00 PM

Description

This firmware release is a maintenance release for the M8024 and M8024S version of PowerConnect switches and includes only bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

NOTE: Please follow software update instructions included in the zip file. "Upgrading PowerConnect Switches from version 4.x.x.x to 4.2.2.3 firmware.pdf" "Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.pdf" NOTE: Release 4.2.2.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.

Compatibility

Systems
PowerConnect M8024
PowerEdge M1000E
Operating Systems
Not Applicable

Applies to

  • PowerConnect M8024
  • PowerConnect M8024S

Fixes & Enhancements

This is a maintenance release so only bug fixes are included. Fixes: - IP routing unexpectedly after reboot despite its not having been enabled. - Telnet existing session is interrupted when "New Telnet Sessions" is set to "Block". - OOB interface unreachable after failover. - Switch CLI help does not locate the 'initiate failover' command properly. - Timeout during SNMP walk on root - "show interfaces switchport" command shows incorrect General Mode Tagged VLANs value - Error while adding an access-list to an access-group - Walk of agentDaiVlanStatsTable returns statistics for all the 4096 VLANs - OOB interface configured with default IP via Setup Wizard incorrectly. - Unable to create VLAN ID and name VLAN in Web GUI - "Failed to get CPU cosq 0 drop counters, error -16" messages in logs - Default "ip address dhcp" command on VLAN 1 causing "failed to bind socket" error repeatedly - agentPortSpeedDuplexStatus SNMP MIB object documentation error - ifIndiscards is still counting VLANdiscards if the interface switchport mode is in trunk mode - Switch doesn't register all the 576 devices if LLDP-MED has all the optional TLVs. - SNMP and LOG errors when setting ifAdminStatus - Cannot type input into external serial connector after reboot of switch - Web GUI doesn't display port 24 if using Internet Explorer 9 - Switchport general configuration, VLAN1 tagged not saved in running config - Cannot rename vlan1 - SNMP Port tag/untag issue - DNS client error in logs and switch locks up and needs to be rebooted. - Terminal Length setting not working as in 4.1 - Trunk port multiple vlan assignment doesn't work properly after reboot - FIP snooping session is not getting established after script apply. - "ip http secure-server" command not getting migrated from 4.1.0.19 build to 4.2.1.3 build. - Data loop in Simple mode when adding VLAN

Installation instructions

            
NOTE: Please follow software update instructions included in the zip file.
"Upgrading PowerConnect Switches from version 4.x.x.x to 4.2.2.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.pdf"

NOTE: Release 4.2.2.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 2.x.x.x or 3.x.x.x to 4.2.2.3 firmware.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
af756a9424e71dc7ff36a6e1391fae5c
PCM8024v4.2.2.3a26.zip
SHA1:
4092c893d92bdc96e26a95203601a53b1e78b98d
PCM8024v4.2.2.3a26.zip
SHA-256:
Not Available
PCM8024v4.2.2.3a26.zip

By downloading, you accept the terms of the Dell Software License Agreement.