AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This is a DOS based firmware flash utility that will update the HL-DT-ST GCC4482 CDRW/DVD (Dell Assembly numbers: YD043, DF451, JF239, and HK118 ) to firmware revision E114.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
E114 firmware
-Improves readability to resolve installation failures and general read failures seen with some media including some Dell PowerEdge Installation and Server Management Versions 5.0 and 5.1 discs.
-Resolves issue related to certain UDF formatting/writes
-Reduces noise when playing audio CD via MusicMatch 10.0
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Note: You will need to provide a bootable DOS Floppy diskette or a bootable DOS Memory Key.
This package does not contain DOS system files.
Warning! Do not power cycle system during Firmware Flash Process.
Firmware Flash Procedure
1. Copy the files extracted from the Zip package to a bootable DOS Floppy diskette or a bootable DOS Memory Key.
2. Boot to the bootable DOS Floppy diskette or bootable DOS Memory Key.
3. The autoexec.bat will run and the firmware flash will begin automatically.
4. When the firmware flash completes successfully remove the bootable DOS Floppy diskette or bootable DOS Memory Key.
5. Power cycle the System.