Dell Support Drivers & Downloads Driver File Formats

Driver Details

This is a DOS based firmware flash utility that will update the TSST TS-H492C CD-RW/DVD to firmware revision DE03.
Release Date 2/15/2007
Importance: Recommended
Version: DE03,A02

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:


Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 955KB

Previous Versions

No previous version available.


This is a DOS based firmware flash utility that will update the TSST TS-H492C CD-RW/DVD to firmware revision DE03.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

The executable will extract files needed to flash the drive in DOS environment and Windows Environement. For DOS environment, these files need to be copied to a bootable DOS Floppy diskette or bootable DOS Memory Key. The executable does not create MS-DOS system files. This flash will update the drive's firmware to DE03. You must remove the bootable Floppy diskette or bootable Memory Key and power cycle the system before using the drive. If the firmware re-flash fails (e.g., system hangs, etc.), power cycle the system and try again.


PowerEdge 1800
PowerEdge 1900
PowerEdge 2900
PowerEdge 800
PowerEdge 830
PowerEdge 840
PowerEdge SC 420
PowerEdge SC 430
PowerEdge SC 440
PowerEdge SC1420
PowerEdge SC1430
Operating Systems
Red Hat Ent Linux 3
Red Hat Ent Linux 4
Novell Netware
MS Windows Server 2003
MS Windows 2000

Applies to


Fixes & Enhancements

-Fixes installation problem when installing with Dell PowerEdge Installation and Server Management discs using Windows Server SP1 ISO images burnt to CD-R.

Installation instructions

Instructions for R148011.EXE


1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Extract Files 
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 
2. Click Continue. 
3. Specify the location to unzip the files. 
4. Click on the OK button to extract files.
   After the files are extracted the message all files were successfully unzipped will appear. 
5. Click the OK button to exit from the installer. 

DOS Based Firmware Flash for TSST TS-H492C  

Note: You will need to provide a bootable DOS Floppy diskette or bootable DOS Memory Key.  
This package does not create DOS system files.

Warning! Do not power cycle system during Firmware Flash Process.

Firmware Flash Procedure:

1) Copy the files extracted from the Zip package to a bootable Floppy or bootable Memory Key.

2) Boot to the Floppy/Memory Key.

3) The autoexec.bat should run and the firmware flash will begin automatically.  

4) When the Firmware Flash completes successfully remove the bootable Floppy/Memory Key. 

5) Power cycle the System. 

Windows Based Firmware Flash for TSST TS-H492C  

Follow the instructions below to execute:

1. Double click on the flash utility (TS-H492C DE03.exe).

2. After flashing of the drive is complete, click on "Restart Windows".

3. System will restart after flash is complete.            


To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
Not Available
Not Available
Not Available

By downloading, you accept the terms of the Dell Software License Agreement.