Dell Configure Cluster Bus Reset, A00
This utility Configures the Emulex HBA port driver to generate bus reset when break reservation command is received. Required for proper fail-over operations of Windows Server 2003 Clusters with Emulex port driver HBA configurations.
| Release Date: | 9/26/2003 |
| Importance: | Optional |
| Version: | A00 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
cfgbusreset.EXE |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 122KB | |
Previous Versions
No previous version available.
Description
This utility Configures the Emulex HBA port driver to generate bus reset when break reservation command is received. Required for proper fail-over operations of Windows Server 2003 Clusters with Emulex port driver HBA configurations.
Level of Importance:Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.
Important Information
This utility should be run only on a windows 2003 Server, EE Operating System.
This Utility is applicable only to Emulex port driver versions (Windows Server 2003 only).
Driver for the Emulex HBA should be installed before running this utility.
Should be run under an account that has administrator privileges.
Compatibility
| Systems Dell | EMC 8P-FC-2 Dell | EMC CX200 Dell | EMC CX400 Dell | EMC CX600 Dell | EMC DS-16B2 Dell | EMC DS-24M2 Dell | EMC Emulex LP982 PowerEdge 1550 PowerEdge 1650 PowerEdge 1750 PowerEdge 2500 / 2500SC PowerEdge 2500 / 2500SC PowerEdge 2550 PowerEdge 2600 PowerEdge 2650 PowerEdge 4400 PowerEdge 4600 PowerEdge 6400 PowerEdge 6450 PowerEdge 6600 PowerEdge 6650 PowerEdge 8450 | Operating Systems MS Windows Server 2003 |
Applies to
- Configure Cluster Bus Reset
Fixes & Enhancements
Initial Release
Installation Instructions
Custom Instructions for cfgbusreset.EXE:
Download
1. Click Download Now, to download the file.
2. At the Export Compliance Disclaimer window, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save this program to disk and click OK. The Save In: window appears.
4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
Install
1. Double-click the new icon on the desktop labeled cfgbusreset.EXE. The Self-Extractor window appears.
2. Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R66390.
3. Leave all of the default settings and click Unzip or OK. If the directory doesn't exist, you'll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R66390 files were extracted.
4. Click OK.
Follow the on-screen opened README file for instructions to run the utility.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
SHA1:
|
Not Available
Not Available
|
cfgbusreset.EXE
cfgbusreset.EXE
|
My Download List
0
files in my list
Drivers Quick Links