Dell Remote Assistant Card II (DRAC II), v. 2.3, A00-00
DRAC II firmware update version 2.3 date stamp 26 October 2000.
| Release Date: | 11/30/2000 |
| Importance: | Optional |
| Version: | 2.3,A00-00 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
B1D17400.exe |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 914KB | |
Previous Versions
No previous version available.
Description
DRAC II firmware update version 2.3 date stamp 26 October 2000.
Level of Importance:Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.
Important Information
Note: Do not interrupt the firmware flash process.
Compatibility
| Systems PowerApp .cache 100 PowerApp .cache 200 PowerEdge 1300 PowerEdge 1400 / 1400SC PowerEdge 1400 / 1400SC PowerEdge 2100 PowerEdge 2200 PowerEdge 2300 PowerEdge 2400 PowerEdge 2450 PowerEdge 300 / 300SC PowerEdge 300 / 300SC PowerEdge 4100 PowerEdge 4200 PowerEdge 4300 PowerEdge 4350 PowerEdge 4400 PowerEdge 6100 PowerEdge 6300 PowerEdge 6350 PowerEdge 6400 PowerEdge 6450 PowerEdge 8450 | Operating Systems Red Hat Linux 6.2 Red Hat Linux 7.0 Novell Netware MS Windows NT 4.0 MS Windows 2000 |
Applies to
- Remote Assistant Card II (DRAC II)
Fixes & Enhancements
This firmware update corrects an issue whereby the DRAC II does not recognize that an AC adapter is connected and shuts down approximately 30 minutes after power interruption.
Installation Instructions
Download the file "B1D17400.exe"
Note: You will need a formatted 3 1/2 inch floppy.
This file will create a bootable firmware diskette.
Using either the MS-DOS command line or Microsoft Windows Explorer, run
the downloaded file "B1D17400.exe"
After the process is complete insert the bootable firmware diskette into
the managed node where the DRAC II is located.
Restart server with firmware floppy inserted in diskette drive. This will
start the firmware flash process.
Note: Do not interrupt the flash process.
Once the process is complete you should reboot your computer.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
53744cf95dd446a48c17c560c81c176c
|
B1D17400.exe
|
|
SHA1:
|
Not Available
|
B1D17400.exe
|
|
SHA-256:
|
Not Available
|
B1D17400.exe
|
My Download List
0
files in my list
Drivers Quick Links