Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
American Megatrends (AMI) PERC 2/SC, PERC2/DC, v.6.32.2.32, A00
PERC 2/SC-DC device driver for Windows Server 2003.
Release Date 4/25/2003
Importance: Recommended
Version: 6.32.2.32,A00

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

PERC2-WS2K3-632A00.exe

Description: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Download Type: HTTP
File Size: 95KB

File Format: Update Package for Microsoft® Windows® Download File Download File
File Name:

RAID-DRVR-R57743.exe

Description: Dell Update Packages in Microsoft Windows 32-bit format can be deployed on Microsoft 64-bit operating systems by implementing the WOW64 emulation applications. WOW64 is a standard feature on most Microsoft operating systems.
Download Type: HTTP
File Size: 1MB

Previous Versions

No previous version available.

Description

PERC 2/SC-DC device driver for Windows Server 2003.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

This Device Driver is compatible with the following firmware versions: Controller Minimum firmware level Description PERC 3/QC 1.74 PERC 3 Quad Channel, PERC 3/DC 1.74 PERC 3 Dual Channel, PERC 3/DCL 1.74 PERC 3 Dual Channel Lite, PERC 3/SC 1.74 PERC 3 Single Channel, PERC 4/DI 2.01 PERC 4/DI, CERC ATA100/4CH 6.62 RAID IDE.

Compatibility

Systems
PowerEdge 1300
PowerEdge 2200
PowerEdge 2300
PowerEdge 2400
PowerEdge 2450
PowerEdge 4300
PowerEdge 4400
PowerEdge 6300
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
Operating Systems
MS Windows Server 2003

Applies to

  • PERC2/DC

Fixes & Enhancements

Changes from 6.25 ================= 1) Changes in the setup files, so that Scsiport driver should give the correct device number and function number to the miniport driver. 2) A timeout is implemented in the driver so that driver shouldn't wait infinitely for the firmware to acknowledge the interrupt. 3) The driver will return an error status for all the offline logical drives. 4) Utilities are issuing 0xc3 calls for getting the logical drive statistics. This is causing the system to crash. This bug has been fixed in the driver. 5) The driver is using Hal functions to program hierarchy bridges and SCSI chips when system goes to D3 standby state. The use of Hal functions were not allowing the driver to pass the HCT test. So we have to disable the Hal calls in the previous releases. A workaround has been done in the driver whereby all the Hal calls have been replaced by its assembly equivalent. 6) During reset, the driver was not clearing all the pending commands whenever the firmware is not able to complete it. 7) Driver is allocating enough continuous memory for the FLASH_WRITE_BLOCK(0x2c) command. 8) The system gives a blue screen when one swaps the boot controller. This bug has been fixed by adding entries of all the supported controllers in the critical data base section of the registry through changes in the oemsetup.inf file. 9) The system was not waking up after a hibernation/standby operation. This bug was caused by the driver. The driver was trying to access PCI_CONFIG space from the ScsiRestartAdapter in the driver. This bug has been fixed by accessing the PCI_CONFIG space from the ScsiSetRunningConfig entry point. 10) A new command has been introduced to enhance the performance for SCSI I/O on non-raid SCSI channel. 11) In case of standby, the driver was not waiting for the firmware to get initialized. This resulted in the driver sending commands to the firmware even when the firmware is not initialized. The fix has been put in the driver. The driver is polling for the Firmware to get initialized before sending any commands to the firmware.

Installation instructions

            
Custom Instructions for PERC2-WS2K3-632A00.exe: 

This program creates a Windows 2000 driver diskette for  the
controllers. You will need a formatted  3  1/2  inch  floppy
diskette for the following procedure.

1) Download the file to a directory on your hard drive.  The
   file downloaded is a self extracting executable.
2) Double click on the file to run the executable.
3) Click on the unzip button to extract files to the floppy.

Power down  the  system  and  install  the  PERC/CERC  card.
Configure the logical  drives  before  proceeding  with  the
driver install described below.


Installing on a new driver on a Windows Server 2003 system
----------------------------------------------------------

1) Boot the system using the Windows Server 2003 CD. 
As the message

"Press F6 if you need to install a third party SCSI or
RAID driver."

appears, press F6 immediately.

2) Within a few minutes, a screen appears that asks for
additional adapters in the system. Choose 'S'.

3) You are prompted for the driver diskette. Insert the
PERC/CERC Windows Server 2003 driver diskette in the floppy
drive and press Enter.

4) A list of drivers for PERC/CERC controllers appears.
Select the right driver for your installed controller and
press Enter to load the driver.

5) A statement is presented saying the driver that you provided
is older then the Windows driver. 

Press 'S' to use the driver on the floppy.

6) Press Enter again to continue installation process as
usual.


Adding the PERC/CERC Driver to an Existing Windows Server 2003.
--------------------------------------------------------------

1) Boot the system to Windows 2003. The Found New Hardware
Wizard displays.

2) If you are installing the PERC 3/SC, PERC 4/DC PERC 4/SC, 
PERC 4/DI or CERC ATA100/4CH, click on Next and 
skip to step 5. Otherwise, click Cancel on all the new devices.

3) Restart the system from the shutdown menu.

4) The Found New Hardware Wizard displays again when the
system boots to Windows Server 2003. Click on Next.

5) Select Search for a suitable driver and click Next to
continue.

6) Select Floppy disk drive, insert the PERC/CERC Windows
2003 driver diskette created above and click Next to
continue.

7) Continue to click on Next and finish the installation.

8) The Found New Hardware Wizard screen appears one time for
each PERC 3/SC, PERC 4/SC, PERC 4/DC controller, three 
times for each PERC 3/DC or PERC 3/DCL controller 
and four times for each PERC 3/QC. Repeat steps 5 - 7 for each 
time the wizard displays to complete installation of the card.

9) To confirm driver installation, right click on My
Computer and select Manage. Click on Device Manager, then
click on SCSI and RAID controllers to see the newly added
PERC 3 controller(s) in the list.

After finishing the driver update, YOU MUST REBOOT YOUR SERVER. 


Updating the PERC/CERC Driver to an Existing Windows Server 2003.
------------------------------------------------------------------------

If your server is already running Windows Server 2003, use the 
following steps 
to update the PERC Windows Server 2003 driver. 

1) Insert the PERC/CERC Windows Server 2003 driver diskette. 

2) Position the mouse pointer on the my computer icon on your Start 
Menu  andright click and select Manage.

3) Position the mouse pointer on Device Manager and click the left 
mouse 
button .

4) Position the mouse pointer on SCSI and RAID controllers and double 
click.

5) Select the PERC controller and double click.

6) Select the Driver tab 

7) Select the Update Driver 

The Upgrade Device Driver Wizard displays.

 

8) Select ”Install from a list of specific location” and click Next to 
continue.

9) Select “Search for the best driver in these locations” and make sure 
that the “search removable media (floppy, cd-rom,…)” option is 
checked. Then click on the Next but            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
PERC2-WS2K3-632A00.exe
SHA1:
Not Available
PERC2-WS2K3-632A00.exe
SHA-256:
Not Available
PERC2-WS2K3-632A00.exe

By downloading, you accept the terms of the Dell Software License Agreement.