Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Multi-Tech External Modem (ZBA), v.1.0, A00
Multi-tech Drivers for Windows NT, Windows 2000 and Netware 4.x and 5.x.
Release Date: 6/13/2000
Importance: Optional
Version: 1.0,A00

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

Mtechzba.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 3MB

Previous Versions

No previous version available.

Description

Multi-tech Drivers for Windows NT, Windows 2000 and Netware 4.x and 5.x.

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Compatibility

Systems
PowerEdge 1300
PowerEdge 2300
PowerEdge 2400
PowerEdge 2500
PowerEdge 2500SC
PowerEdge 4300
PowerEdge 4350
PowerEdge 4400
PowerEdge 600SC
PowerEdge 650
Operating Systems
Novell Netware
MS Windows NT 4.0
MS Windows 2000

Applies to

  • External Modem (ZBA)

Fixes & Enhancements

NA

Installation instructions

            
For Windows environments:
A.  Use the Multi-Tech Global Wizard for MT5634ZBA initial setup and 
country configuration in Windows NT environments.  This modem is not 
approved in, or configured for operation in all countries, so it is 
important to first check the MT5634ZBA initial setup and country 
configuration in the Global Wizard program.
B.  Use the Multi-Tech DOSFlash upgrade utility in a DOS window 
environment.
C.  Use the Multi-Tech NTFlash upgrade utility in Windows NT 
environments.
D.  Be sure to turn off Windows NT RAS service before flash upgrading 
the MT5634ZBA.
E.  For Windows systems with autorun disabled, run the program 
AUTORUN.EXE from the root directory of the CD-ROM to begin installation. 


For non-Windows environments:
A.  To configure for a specific country, execute the appropriate AT 
commands in a terminal window (refer to the Country Code Configuration 
section later in this document). This modem is not approved in, or 
configured for operation in all countries, so it is important to first 
check the MT5634ZBA initial setup and country configuration. 
B.  To upgrade using DOSFlash, use the DOSFLASH.EXE application 
located in the DOSFLASH directory on the CD-ROM.
C.  For installation in a Novell Netware environment, use the MDC 
(Modem Definition Compiled) file in the NOVELL directory on the 
CD-ROM. For further information refer to the README.TXT file in that 
directory.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
487ac5002c6b14ff37cc1f474088b00f
Mtechzba.exe
SHA1:
Not Available
Mtechzba.exe
SHA-256:
Not Available
Mtechzba.exe

By downloading, you accept the terms of the Dell Software License Agreement.