Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell OpenManage HIP 3.5.2 Update for NNM SE & Server Console Trap Message, A01-00
Dell OpenManage Hardware Instrumentation Package 3.5.2 Update for NNM SE & Server Console Trap Message
Release Date 10/13/2000
Importance: Optional
Version: A01-00

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

HIPS6up1.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 452KB

Previous Versions

No previous version available.

Description

Dell OpenManage Hardware Instrumentation Package 3.5.2 Update for NNM SE & Server Console Trap Message

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Important Information

NOTICE: You must install Dell OpenManage HIP 3.5.2 before installing this update. NOTICE: When applying this update, install it on managed node servers only. Do not install this update on the management station (the system that is running the HP OV NNM SE management console).

Compatibility

Systems
PowerEdge 1300
PowerEdge 2300
PowerEdge 2400
PowerEdge 2450
PowerEdge 4300
PowerEdge 4350
PowerEdge 4400
PowerEdge 6300
PowerEdge 6350
PowerEdge 6400
PowerEdge 6450
PowerEdge 8450
Operating Systems
Novell Netware
MS Windows NT 4.0
MS Windows 2000

Applies to

  • OpenManage HIP 3.5.2 Update for NNM SE & Server Console Trap Message

Fixes & Enhancements

This update allows PowerEdge servers to report correctly the systems management information related to power supply to the management console using the Dell OpenManage HIP version 3.5.2.

Installation instructions

            
To update the Dell OpenManage HIP version 3.5.2 on managed node servers 
running either Microsoft Windows 2000 Server Family or Windows NT, perform 
the following steps:

1. In Windows Explorer, double-click the file "dbagt001.exe" located in 
the self-extracting zip file (HIPS6up1.exe).
2. Click "Update". When the update finishes, a completion message box 
displays.

To update the Dell OpenManage HIP 3.5.2 on systems running Novell NetWare 
version 4.x or 5.x, perform the following steps:

NOTE: If you have not rebooted your system since you first installed Dell 
OpenManage HIP, the following update procedure will not work.

1. Unload the Dell baseboard agent by entering the command: "unload 
dcbase".
2. Map a disk drive from a workstation to the path on the PowerEdge system 
running the Novell NetWare 4.x or 5.x operating system's "sys 
   volume".
3. Copy the updated baseboard agent with the command:
Copy x:\bin\dcbase.nlm  y:\system\dell\dcbase.nlm (where x:\ is the 
location of the extracted files and y:\ is the mapped drive on the server).
4. Reboot the Dell system.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
071ef793feac4090d4a10f183b8658ec
HIPS6up1.exe
SHA1:
Not Available
HIPS6up1.exe
SHA-256:
Not Available
HIPS6up1.exe

By downloading, you accept the terms of the Dell Software License Agreement.