Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Adaptec PERC3/Di, v.2.8.1.7692, A12
This software contains v2.8.1.7692 Firmware for the PowerEdge 2500/2500SC & PowerVault PV750N PERC 3/Di controller.
Release Date 11/21/2007
Importance: Recommended
Version: 2.8.1.7692,A12

The following formats are available for the file you have selected

File Format: Floppy Download File Download File
File Name:

BR168394.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 1MB

File Format: Update Package for Microsoft® Windows® Download File Download File
File Name:

RAID_FRMW_WIN_R168394.EXE

Description: Dell Update Packages in Microsoft Windows 32-bit format can be deployed on Microsoft 64-bit operating systems by implementing the WOW64 emulation applications. WOW64 is a standard feature on most Microsoft operating systems.
Download Type: HTTP
File Size: 2MB

Previous Versions

No previous version available.

Description

This software contains v2.8.1.7692 Firmware for the PowerEdge 2500/2500SC & PowerVault PV750N PERC 3/Di controller.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

Important information about this package =========================================== * This firmware package supports PERC 3/Di in following platforms: -PowerEdge 2500/2500SC, integrated PERC 3/Di, in both non-PAE & PAE configurations -PowerVault 750N, integrated PERC 3/Di, non-PAE only * This firmware REQUIRES minimum System BIOS rev A07 PRIOR to flashing the firmware. Flashing this firmware to the system without first having updated to the above BIOS will render the system inoperable. * Before updating your system to v2.8 level using Update Packages for Windows, please make sure your firmware level is at least v2.6 for your PERC 3/Di controller. * PERC 3/Di on PE2500/2500SC servers or PV750N appliances using legacy firmware levels of 2.1.3 or 2.1.5 will require the following steps to assure a successful manual update to firmware revisions 2.8.x. Steps for manual update from firmware v2.1.X to firmware v2.8.x: To assure a proper update to the PERC 3/Di Windows driver version 2.5 or later, it is necessary to apply the driver 2.1-5 patch prior to updating to the driver version 2.5. Failure to install the driver patch may result in a system hang followed by a blue screen error during the reboot. ***NOTE: This patch file is not included nor is it needed with PERC 3/Di driver versions 2.6, 2.7, or 2.8. The driver upgrade patch is only required on systems using older PERC 3/Di 2.1.x firmware/driver code running Windows 2000. Systems already using version 2.5 can be updated directly to version 2.7.0 or higher without problems. To update to version 2.5: Run the 2.1.x driver patch (p3patch.bat) included with the Windows 2000 2.5 driver download files. Update the Windows 2000 driver to 2.5. Update the firmware to version 2.5 when rebooting the system. To update from version 2.5 to version 2.8.x: Update System BIOS PRIOR to flashing the firmware. Minimum system BIOS required is A07. Update the Windows 2000 driver to 2.8.x. Update the firmware to version 2.8.x when rebooting the system. * known Documentation Error :- PERC3/Di user guide mentions that PERC3Di Controller Supports up to 64 Containers per controller, but it actually supports only 24 containers per Controller.

Compatibility

Systems
PowerEdge 2500
PowerEdge 2500SC
Operating Systems
Not Applicable

Applies to

  • Dell Device
  • PERC3/Di

Fixes & Enhancements

Fixes and Enhancements ========================== 2.8.1 Build 7692 ---------------- -Fixed an issue when one of the drive goes offline and is replaced with the new drive in RAID5 array, rebuild does not kicks off. 2.8.1 Build 6098 ---------------- - fixed an issue which occurs when reconfiguring an array with CLI while array was under stress; can result in kernel panic in Linux. - fixed a bug where a 300GB hard drive could not be assigned as a hot spare for a 300GB R1 using full drive capacities. 2.8.1 Build 6097 ---------------- -fixed a defect which occurs when reconfiguring an array to a size greater than 1.09 terabytes; can result in data loss. –fixed bug where previous firmware did not re-calculate disk capacity when a drive is replaced. 2.8.0 Build 6095 ---------------- -single bit change to turn off flag indicating 64-bit compatibility. Needed to fix OMSS Enclosure support issue with RHEL4. 2.8.0 Build 6092 ---------------- -Background controller cache flush routine modified to flush smaller number of buffers during I/O without impacting RAID throughput. This change fixes driver timeout (manifesting as loss of drive access and filesystem errors like ext3_get_inode_loc errors) seen under certain Linux configurations. 2.8.0 Build 6089 ---------------- -Default changed to 30 Second Timeout for controller BIOS option to pause or continue when RAID configuration is found altered or degraded. This behavior is same as pre v2.8 firmware behavior. 2.8.0 Build 6082 - Initial release of v2.8 firmware --------------------------------------------------- -The ROMB firmware modified eliminating need for separate SCSI driver when channel-B is configured as SCSI. Now only one driver is needed for both RAID/RAID and RAID/SCSI configurations (not applicable to PERC2/QC). -Controller BIOS option added to pause or continue after 30 seconds timeout when RAID configuration is found altered or degraded. -Additional ESM fix for pulled/missing drives. -HIM_PCI_ERR correction to power management interrupt. -Cache flush loop decreased to prevent extensive spin-lock hold during high I/O. -AFU fix to block firmware installation based on proper level System BIOS. -SCSI Passthru Event filtering. -Disallow selection of drive to create raid when already reach maximum limit. -Disable interrupts around doing queue accesses in CompleteFIB( ).

Installation instructions

            
Instructions for BR168394.exe

Download 

1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Diskette Creation 
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set. 
2. Insert a blank diskette then click Continue. 
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1. 
4. After all the files have been copied to the last diskette, click Finish. 


Dell Update Package Instructions for RAID_FRMW_LX_R168394.BIN:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the "./RAID_FRMW_LX_R168394.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing "./RAID_FRMW_LX_R168394.BIN" from the shell.
4. Follow the remaining prompts to perform the update.


*Important Note – If the Dell Update Package firmware flash (upgrade/downgrade) fails, there is no threat of data loss. In this case, please use the Dell release download to create diskette(s) and flash firmware from these diskettes.
GnuPG Signature of Dell Update Package Instructions for RAID_FRMW_LX_R168394.BIN.sign:

Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, RAID_FRMW_LX_R168394.BIN.sign

Dell Update Package Instructions for RAID_FRMW_WIN_R168394.EXE:

Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


*Important Note – If the Dell Update Package firmware flash (upgrade/downgrade) fails, there is no threat of data loss. In this case, please use the Dell release download to create diskette(s) and flash firmware from these diskettes.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
A36D8E4173722C179D991FEDDB6F1E75
RAID_FRMW_WIN_R168394.EXE
SHA1:
Not Available
RAID_FRMW_WIN_R168394.EXE
SHA-256:
Not Available
RAID_FRMW_WIN_R168394.EXE

By downloading, you accept the terms of the Dell Software License Agreement.