Hitachi Jura - E 10K U320 36GB 68 Pin, Jura - E 10K U320 36GB 80 Pin, Jura - E 10K U320 73 GB 68 Pin, Jura - E 10K U320 73 GB 80 Pin, Jura - E 10K U320 146 GB 68 Pin, Jura - E 10K U320 146 GB 80 Pin, v.321G, A01
This release changes the firmware update utitlity from a floppy based utility to a CDROM based utility. The underlying firmware is still version 321G. This firmware release corrects a problem that caused Symmpi1 errors found in the Event Log of Windows 2000 or Windows 2003 on PE1600 and PE2600 systems. In the event this issue is found in RAID environments, the firmware update utility provides the additional controller support.
| Release Date: | 6/6/2006 |
| Importance: | Recommended |
| Version: | 321G,A01 See Previous Versions |
The following formats are available for the file you have selected
| File Format: | ISO Image |
Download File
|
| File Name: |
CD29FWUP.iso |
|
| Description: | This file contains an ISO image used to create a CDROM. Download the file to a folder on your hard drive, then create a CD using your preferred CD burning software. | |
| Download Type: | HTTP | |
| File Size: | 4MB | |
Previous Versions
|
321E, A00
<ul><li><b>Vendor Version :</b> 321E</li><li><b>Dell Version :</b> A00</li></ul>
|
12/31/2003 12:59:42 PM |
Description
This release changes the firmware update utitlity from a floppy based utility to a CDROM based utility. The underlying firmware is still version 321G. This firmware release corrects a problem that caused Symmpi1 errors found in the Event Log of Windows 2000 or Windows 2003 on PE1600 and PE2600 systems. In the event this issue is found in RAID environments, the firmware update utility provides the additional controller support.
Level of Importance:Recommended
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).
Important Information
Firmware upgrade while controller is doing background I/O task:
Do not run if Back Ground Initalization is in process or may take place. Firmware upgrade process will fail if any background I/O task (i.e. RAID-5 background consistency check or power on auto-resume rebuild and reconstruction) is being performed.
BGI also occurs approximately 5 minutes after creating a Raid volume. If BGI occurs during Microcode down load, the drive will fail and blink amber light. Drive will accept Microcode download after BGI finishes with no negative effects.
Compatibility
| Systems PowerEdge 1400 / 1400SC PowerEdge 1400 / 1400SC PowerEdge 1500SC PowerEdge 1600SC PowerEdge 1650 PowerEdge 1750 PowerEdge 2550 PowerEdge 2600 PowerEdge 2650 PowerEdge 3250 PowerEdge 4600 PowerEdge 600SC PowerEdge 650 PowerEdge 6600 PowerEdge 6650 PowerEdge 800 PowerVault 770N PowerVault 775N | Operating Systems Red Hat Ent Linux 2.1 Red Hat Linux 8.0 Red Hat Linux 9.0 MS Windows Server 2003 MS Windows 2000 |
Applies to
- Jura - E 10K U320 73 GB 80 Pin
- Jura - E 10K U320 146 GB 80 Pin
- Jura - E 10K U320 36GB 68 Pin
- Jura - E 10K U320 146 GB 68 Pin
- Jura - E 10K U320 73 GB 68 Pin
- Jura - E 10K U320 36GB 80 Pin
Fixes & Enhancements
Initial Release
This firmware release corrects a problem that caused Symmpi errors found in the Event Log of Windows 2000 or Windows 2003 on PE1600 and PE2600 systems. During bootup, the Hitachi Jura-E drives perform a back-ground maintenance task during contoller initialization, causing a timeout. This issue has been found in SCSI, non-RAID environments. In the event this issue is found in RAID environments, the firmware update utility provides the additional controller support.
Installation Instructions
Custom Instructions for CD29FWUP.iso:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Media Creation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
Installation
1. Boot this CD on a server, with the CD-ROM device enabled as the first boot device.
2. Follow the screen prompts to update your drive firmware.
Note: If media is viewed using Windows explorer, only the file Booting.txt will be visible. This CD was created using hard-disk emulation.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
7d21ea339ff244fbcd04d56dc1cd7adf
|
CD29FWUP.iso
|
|
SHA1:
|
Not Available
|
CD29FWUP.iso
|
|
SHA-256:
|
Not Available
|
CD29FWUP.iso
|
My Download List
0
files in my list
Drivers Quick Links