Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Promise SATA Controller Card, v.1.0.20.53, A01
Release A01 (Promise Build 1.00.20.53) Promise SATA RAID card (Fastrak S150 TX2) Logo'ed driver for Windows 2000 Server and Windows 2003 for PowerEdge 400SC system.
Release Date 11/17/2003
Importance: Optional
Version: 1.0.20.53,A01

The following formats are available for the file you have selected

File Format: Floppy Download File Download File
File Name:

BR67468.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 384KB

Previous Versions

No previous version available.

Description

Release A01 (Promise Build 1.00.20.53) Promise SATA RAID card (Fastrak S150 TX2) Logo'ed driver for Windows 2000 Server and Windows 2003 for PowerEdge 400SC system.

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Compatibility

Systems
PowerEdge 400SC
Operating Systems
MS Windows Server 2003
MS Windows 2000

Applies to

  • SATA Controller Card

Fixes & Enhancements

Fixed a dual controller failure on MS HCT test

Installation instructions

            
Custom Instructions for BR67468.exe:

Floppy Disk Boot to Disk for BR65213.exe

Download
1.	Click Download Now, to download the file.
2.	If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3.	When the File Download window appears, click Save (Windows XP 
users will click Save) this program to disk and click OK.  The Save In: 
window appears. 
4.	From the Save In: field, click the down arrow then click to 
select Desktop and click Save.  The file will download to your desktop.
5.	If the Download Complete window appears, click Close.  The file 
icon appears on your desktop.

Hard Drive Floppy Disk Creation
1.	Get 1 blank, formatted floppy disks.
2.	Double-click the new icon (it looks like a floppy diskette) on 
the desktop.  The Self-Extractor window appears.
3.	Click Setup.  An black MS-DOS window appears with a message 
indicating that you need 1 floppy diskettes.
4.	Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette. Insert 
a floppy disk into the floppy disk drive.
5.	Press the [ENTER] key.  A message appears indicating that all 
data on the disk will be erased.
6.	Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires 
more than one diskette, repeat steps 4 – 6 until you reach the end of the 
diskette set. 
7.	After all the files have been copied to the last floppy disk, 
press the [ENTER] key and the MS-DOS window closes.

Installation
1.  Refer to operating system documentation for driver installation/upgrade procedures.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
BR67468.exe
SHA1:
Not Available
BR67468.exe
SHA-256:
Not Available
BR67468.exe

By downloading, you accept the terms of the Dell Software License Agreement.