Dell PowerEdge C Mellanox CX3 FDR Single Port Mezz Card FW 2.32.5100

Fixes
- Fixed an issue for TLV with length 0.
- Fixed an issue related to sync VLAN IRQ operation with trunk IRQ operation.
- Fixed an issue which enabled a netdevice (VLAN) to open/close twice.
- Fixed an issue which prevented the iSCSI initiator's name from
being received from HII.
- Fixed an issue related to dual port adapters; occasionally, booting
from the second port resulted in TFTP download failure when the first
port was already linked up with DHCP, and has received a TFTP address.
- Fixed an issue which caused PXE boot failure when using a filename
if iSCSI rootpath is set.
- Fixed an issue which prevented the device to PXE boot from the 2nd
port if first port was already downloaded.
- Fixed compilation issue.
- Fixed a broken VLAN issue.
- Fixed a retry issue when the value is infinite.

Enhancements
- Added support to query PTYS, PTOS registers through ACCESS_REG PRM command.
- Added support for QCN.
- Enabled the driver to use VXLAN offloads on TX side without Device Managed Flow Steering (DMFS).
- Added support for CLP access to NVRAM.
- Added support for more than 22 QPs per MCG in DMFS.
- Added support for high rate steering mode (a.k.a Simplified Steering)
- Added support for reading current hardware mode through the QUERY_PORT PRM command.
- Added CSUM mode reporting in QUERY_DEV_CAP command.
- Added additional configuration options for UPDATE_QP command.
- Added support for 128 Byte stride for CQ/EQ.
- Enabled module EEPROM access using command I/F.
- Reset Flow improvements and graceful handling of error caused by Virtual Functions.
- RX performance optimization for single port cards.
- Promiscuous mode performance improvements.
- Added support for Secure Host mode for ConnectX-3/ConnectX-3 Pro adapter cards.
- Added Port protocol configuration option.
- Added support for GPIO swap.
- 40GbE SI improvements.
- Added support for Temp Sensing Vendor specific MAD.
- Added validation script for the released ROMs
- Added the option to always keep SAN hook to enable WIN install on iSCSI target
- Added compilation flag around the flash readout.
- Added URI Boot retry. Default retries = 0.
- Added Unmap MPT command in teardown.
- Added support for HII ISCSI configuration.
- Added 64-bit PCI BAR support (Large bar).
- Added the option added for running PXE with promiscuous VLAN.
- Re-added COMBOOT image support by default.
- Enabled pages-function handling in Connect-IB initialization stage to
work according to the PRM.
- Applied additional patches from ipxe.org
- Updated the window even if ACK does not acknowledge new data.
- Modified the error print to debug print.
- Modified the printed string when initializing devices.
- Modified the error print. Added additional information to make the
output more user-friendly.
- Changed the size of the domain name array to 0xfd.
- Disabled the waiting period for link up on trunk-net-device when
VLAN is enabled on port.
- Removed unsupported EQ event in Connect-IB