LiteOn 1100W PSU (PN: HT6GX, 38GYJ, NTCWP, & GYH9V) Firmware Package
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides the firmware for Lite-On 1100W Power Supply (PN: HT6GX, 38GYJ, NTCWP, & GYH9V).
To view all drivers for your PowerEdge FX2/FX2s, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
Power_Firmware_FR60C_LN_09.13.59.BIN | 6.88 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
Update Package for Red Hat Linux
File Name:
Power_Firmware_FR60C_LN_09.13.59.BIN
File Size:
6.88 MB
Format Description
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
a2477e1b4be4a40a435937fb1ba11ea5
SHA1:
ee055b8b64518145714c43b7e0a4491b6900b83e
SHA-256:
1dde0849ffbf7ebace86ba3c327fb82b7b901c42882f6f79a89e0bdab1ff50bb
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Initial Release for Lite-On 1100W PSU with PN: HT6GX.
Optional firmware Update for Lite-On 1100W PSU with PN : 38GYJ, NTCWP, & GYH9V.
Read More
Optional firmware Update for Lite-On 1100W PSU with PN : 38GYJ, NTCWP, & GYH9V.
Version
09.13.59, 09.13.59
Release date
15 Aug 2014
Download Type
Firmware
Category
Power
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
View Important Information
File Format:
A GnuPG file which contains a cryptographic signature
File Name:
Power_Firmware_FR60C_LN_09.13.59.BIN.sign
File Size:
189 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
6ab982a2267abca68b912b1dded4a912
SHA1:
91ec5642aeac724065a8c43a96ab44850828ad5c
SHA-256:
050e1247d55bea5b884aa57093eda8034f7b86d8e54eed4607e3ada26d6e6e6d
File Format:
Update Package for MS Windows 32-Bit
File Name:
Power_Firmware_FR60C_WN32_09.13.59.EXE
File Size:
10.78 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
dbcbc1cd2ff4f3eddec86af2e2b05207
SHA1:
ce96432b39c114747cd8b921e992ab8bb972b273
SHA-256:
0a21ad526d853ae925bf8d60041ed118b0bb4dcb8dc377d021d8c1ba46f5d330
File Format:
Update Package for MS Windows 64-Bit.
File Name:
Power_Firmware_FR60C_WN64_09.13.59.EXE
File Size:
18.71 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
b5ba536cf0d0ff630abd92f2e5a7013e
SHA1:
6a52f0659048752aab5eb4e3c8284bf88c81cb90
SHA-256:
b204b9d936872f9690f31317d60bd86eb867eb9e8b3d78b75e5a9426bc797783
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
IMPORTANT: After successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the PSU firmware. Once the firmware update is complete, the managed system will reboot automatically.
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter into an irrecoverable state and will cause managed system not to boot.
WARNING: After successful PSU FW Update, the PSU FW version for following DPNs shall be:
PSU DPN: GYH9V, PSU FW Version: 07.12.59 or 07.13.59
PSU DPN: NTCWP, PSU FW Version: 07.13.59
PSU DPN: 38GYJ, PSU FW Version: 09.13.59
PSU DPN: HT6GX, PSU FW Version: 09.13.59
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter into an irrecoverable state and will cause managed system not to boot.
WARNING: After successful PSU FW Update, the PSU FW version for following DPNs shall be:
PSU DPN: GYH9V, PSU FW Version: 07.12.59 or 07.13.59
PSU DPN: NTCWP, PSU FW Version: 07.13.59
PSU DPN: 38GYJ, PSU FW Version: 09.13.59
PSU DPN: HT6GX, PSU FW Version: 09.13.59
Supported Operating Systems
Not Applicable
Looking for a different OS? View the list of Dell supported operating systems
Applies to
LiteOn 1100W PSU
Installation instructions
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter an irrecoverable state and will cause managed system not to boot.
IMPORTANT:
After a successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to disturb/restart manually the system, wait until the PSU FW update finishes. (Update time may vary depending on number of PSU for update, it may vary approximately from 10 mins to 20 mins.Margin should be added to ensure the Dell Update Package (DUP) is not interrupted. Once the firmware update is complete, the managed system will reboot automatically.
Instructions for ".BIN" File:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN " file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the fileand double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Reboot will be required
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter an irrecoverable state and will cause managed system not to boot.
IMPORTANT:
After a successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to disturb/restart manually the system, wait until the PSU FW update finishes. (Update time may vary depending on number of PSU for update, it may vary approximately from 10 mins to 20 mins.Margin should be added to ensure the Dell Update Package (DUP) is not interrupted. Once the firmware update is complete, the managed system will reboot automatically.
Instructions for ".BIN" File:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN " file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the fileand double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" File:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Reboot will be required
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.