Dell 6Gbps SAS HBA Firmware Package 07.03.06.00
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Dell 6Gbps SAS HBA Firmware Package 07.03.06.00
To view all drivers for your PowerEdge R310, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN | 9.6 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
Update Package for Red Hat Linux
File Name:
SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN
File Size:
9.6 MB
Format Description
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
97ea7fee5dbc323fa2ca63a0ccfa18e2
SHA1:
ca4517fd8e3e75acdbd802a3f97ce14363c57fd5
SHA-256:
08f4cb410fb74aafcfa85000d927e7e2df8214d2267673d6b495fe36b69424b4
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes
-No firmware code change from version A10. This release fixes a bug where SLES 11 SP3 operating systems could hang after the DUP completes the FW flash and the system attempts to reboot.
Enhancements
-Not applicable
Read More
-No firmware code change from version A10. This release fixes a bug where SLES 11 SP3 operating systems could hang after the DUP completes the FW flash and the system attempts to reboot.
Enhancements
-Not applicable
Version
07.03.06.00, A11
Release date
09 Oct 2014
Download Type
Firmware
Category
SAS Non-RAID
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
View Important Information
File Format:
A GnuPG file which contains a cryptographic signature
File Name:
SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN.sign
File Size:
189 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
fbaee77f1296f7d8bcb8e6fa578b3119
SHA1:
6572dc5cc3437cddf9a5655c73b2e74179707b76
SHA-256:
e7bcc48f7aed1e825f136b7883b3016d4b5f47bb7b7be5ab277e30fef313eb34
File Format:
ZipPack External
File Name:
SASHBA_Firmware_6GBPS-SAS-HBA_07.03.06.00_A11_ZPE.exe
File Size:
861.68 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
8b3d9e7382085df9ef4b79cf4950e822
SHA1:
037ef6730e6be202700fb4f1912ae5b492ef4a25
SHA-256:
2454b8de973e0921cea1bae5304a8bb0c731812c46719af57adbc06f23c8500f
File Format:
A text file containing customer friendly fixes and enhancements information
File Name:
SASHBA_Firmware_6GBPS-SAS-HBA_RELNOTES_07.03.06.00_A11.txt
File Size:
2.93 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
80504dd906c60c8c5c3159e4f1ce6741
SHA1:
32b537d5d278857b67480d0eaab9d26f0088ba1b
SHA-256:
be9400e9e0f143f048902e30c35f2138ced47716c432b83a96484215d360507d
File Format:
Update Package for MS Windows 32-Bit
File Name:
SAS-Non-RAID_Firmware_K161K_WN32_07.03.06.00_A11.EXE
File Size:
12.32 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
31e25460b60c0e55a35dc8b2d0227e24
SHA1:
92eecd6dd903200691d321db73c8d32345bab8a8
SHA-256:
e8197b989bb1fad9c77ffe6a10de7cc7e3d98f7f5c31480738de1dd072b800ce
File Format:
Update Package for MS Windows 64-Bit.
File Name:
SAS-Non-RAID_Firmware_K161K_WN64_07.03.06.00_A11.EXE
File Size:
20.32 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
3c91401378b674aa576de91bf72a06b8
SHA1:
89a383b0bae8a1efb0ff9f8242b35aeeb3499228
SHA-256:
ecda973b92ab9d42ed28343fccb5d73b4e2de43328bfa00658d2ec75af9b9378
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
When installing an OS, be sure to select a Boot Device in CTRL+C. In CTRL+C, under SAS Topology, scroll down to the desired Physical Disk or Virtual Disk and enter ALT+B to select the device as your Boot Device.
- Resynch, Background Init and Consistency Check processes will always occur serially.
- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details.
- When adding a Dell 6Gbps SAS controller to a system, the new controller may need to be added to the controller boot order in the PERC H200 BIOS / 6Gbps SAS configuration Utility.
- Resynch, Background Init and Consistency Check processes will always occur serially.
- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details.
- When adding a Dell 6Gbps SAS controller to a system, the new controller may need to be added to the controller boot order in the PERC H200 BIOS / 6Gbps SAS configuration Utility.
Other Available Versions
07.03.06.00, A1022 Mar 2013
Supported Operating Systems
Not Applicable
Looking for a different OS? View the list of Dell supported operating systems
Applies to
6Gbps SAS HBA
Installation instructions
Instructions for SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN--version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BINfrom the shell.
4. Follow the remaining prompts to perform the update.
Instructions for SAS-Non-RAID_Firmware_K161K_WN32_07.03.06.00_A11.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Instructions for SASHBA_Firmware_6GBPS-SAS-HBA_RELNOTES_07.03.06.00_A11.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
GnuPG Signature of Dell Update Package Instructions for SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN.sign
Instructions for SASHBA_Firmware_6GBPS-SAS-HBA_07.03.06.00_A11_ZPE.exe:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute the batch file called flash.bat
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN--version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BINfrom the shell.
4. Follow the remaining prompts to perform the update.
Instructions for SAS-Non-RAID_Firmware_K161K_WN32_07.03.06.00_A11.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Instructions for SASHBA_Firmware_6GBPS-SAS-HBA_RELNOTES_07.03.06.00_A11.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
GnuPG Signature of Dell Update Package Instructions for SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Non-RAID_Firmware_K161K_LN_07.03.06.00_A11.BIN.sign
Instructions for SASHBA_Firmware_6GBPS-SAS-HBA_07.03.06.00_A11_ZPE.exe:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute the batch file called flash.bat
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.