Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Fujitsu SAS MBD2147RC and MBD2300RC firmware version D809.
This release contains firmware version D809 for Fujitsu SAS (10K rpm 2.5" SAS) 146GB and 300GB Hard Drives. Vendor model numbers Fujitsu MBD2147RC (AL11SE, 2.5", 10K, SAS, 146GB, DU) (Firmware) and Fujitsu MBD2300RC (AL11SE, 2.5", 10K, SAS, 300GB, DU) (Firmware)
Release Date 4/5/2012
Importance: Recommended
Version: D809,A01

The following formats are available for the file you have selected

Previous Versions

No previous version available.

Description

This release contains firmware version D809 for Fujitsu SAS (10K rpm 2.5" SAS) 146GB and 300GB Hard Drives. Vendor model numbers Fujitsu MBD2147RC (AL11SE, 2.5", 10K, SAS, 146GB, DU) (Firmware) and Fujitsu MBD2300RC (AL11SE, 2.5", 10K, SAS, 300GB, DU) (Firmware)

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

Important Information - External: This update will not run if any of the following conditions exist 1. Any Virtual Disk that is not optimal. 2. A RAID container that is performing a Background Initialization or Consistency Check. 3. A Rebuild, Resync, or copyback function is taking place. 4. A RAID set that is Partially Degraded or in a Degraded state. This update will run on drives remaining in a RAID set that is in a Offline state. There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.

Compatibility

Systems
External OEMR 1950
External OEMR R210II
External OEMR R910
PowerEdge 1950
PowerEdge 1955
PowerEdge 2950
PowerEdge 2970
PowerEdge 6850
PowerEdge C2100
PowerEdge C2100
PowerEdge C6100
PowerEdge C6100
PowerEdge M600
PowerEdge M605
PowerEdge M610
PowerEdge M610x
PowerEdge M620 (for PE VRTX)
PowerEdge M710
PowerEdge M710HD
PowerEdge M805
PowerEdge M905
PowerEdge M910
PowerEdge R210
PowerEdge R210 II
PowerEdge R310
PowerEdge R410
PowerEdge R415
PowerEdge R510
PowerEdge R515
PowerEdge R610
PowerEdge R710
PowerEdge R715
PowerEdge R805
PowerEdge R810
PowerEdge R815
PowerEdge R900
PowerEdge R905
PowerEdge R910
PowerEdge T110 II
PowerEdge T310
PowerEdge T410
PowerEdge T610
PowerEdge T710
PowerVault MD1120
PowerVault MD1200
PowerVault MD1220
PowerVault MD3600F
PowerVault MD3600i
PowerVault NX1950
Operating Systems
Not Applicable

Applies to

  • Dell Device
  • AL11SE, 2.5", 10K, SAS, 73GB, DU
  • AL11SE, 2.5, 10K, SAS, 146GB, DU
  • AL11SE, 2.5, 10K, SAS, 300GB, DU
  • AL11SE, 2.5, 10K, SAS6, 146GB, DU
  • AL11SE, 2.5, 10K, SAS6, 300GB, DU

Fixes & Enhancements

Fixes / Enhancements: Performance improvements to Sequential Verify Resolved a rare issue that caused reported an incorrect sense code

Installation instructions

            
Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Detailed Instructions

1) Click Download now.
The File Download window appears.

2) Click the Save button.
The Save As window appears.

3) Select Desktop using the drop-down menu to the right of Save in.

4) Click the Save button.
A progress meter moves as the download is completed.

5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.

6) Double click the Icon on your desktop for the newly saved file.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
SHA1:
Not Available
SHA-256:
Not Available

By downloading, you accept the terms of the Dell Software License Agreement.