Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell FCB Firmware (PIC18), v.1.18, A00
Release Date: 11/1/2011
Importance: Recommended
Version: 1.18,A00

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

FCB.00_118_A00_customer.exe

Description: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Download Type: HTTP
File Size: 1MB

Previous Versions

No previous version available.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Compatibility

Systems
PowerEdge C6105
PowerEdge C6145
Operating Systems
Not Applicable

Applies to

  • FCB Firmware (PIC18)

Fixes & Enhancements

Add Features -------------- 1. Add new oem command for FCB Version info to BMC. Please refer new oem command in BMC spec. 2. Add check PSU MFR_MODEL. If not same enable the PSU Mismatch bit, info BMC to flash amber LED. Enhance -------------- 1. Change the PSU POUT formula from DIV 9.6 to DIV 12. 2. Change the PSU POUT read from PSUOUT command to read from PSUPIN.

Installation instructions

            
Custom Instructions for FCB.00_118_A00_customer.exe:

1. Update FCB FW through KCS:
    FCBFLASH.EXE is a DOS version utility for flashing FCB firmware image. The following is utility usage.
        a. Flash FCB Firmware
            Usage: 
                FCBFLASH.EXE [-o ] [-t]  [FCB FW BINARY filename]
                                
                -o : Update FCB runtime binary file 
                -t :  Update FAN table binary file 

                ex1:use FCB.BAT to update FCB runtime binary file 
                    FCB.BAT 
                                
                ex2: update FCB runtime binary file v1.12 
                    FCBFLASH -o FCBV0112.BIN 

                ex3: update FAN fantable binary file 
                    FCBFLASH  -t FANV0109.BIN

                ex4: Get HELP for FCBFlash.exe 
                    FCBFLASH  + [enter]

            Help:
                "==========User Guild=========="
                "This flash tool used for upgrade FCB FW ( Pic18)"
                "Note that: The pic18 FW must have header."
                "If you want to flash pre-version FW without header, please use pre-version tool such as V0.4."
                "<-t> Flash Fan Speed Control table.");
                "<-o> Use OEM command. Default: Master Write_r command");
                "The following is an example, FYI..........");
                "FCBflash  means all.bin");
                "FCBflash <-o>  means use OEM command to flash all.bin");
                "FCBflash <-t>  means fsc.bin");
                                
        
              
2. Linux FCB flash tool flash step
2-1. Open a Linux terminal.
2-2. Copy flash tool to the local computer work directory
2-3. type ./fcb.sh to update FCB bin file
2-4. type ./fcbflash to see help as below:

fcbflash tool will auto stop ipmi service

  Start to run FW update tool  .......            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
bc77b19494ef4506314f141ce94c8b93
FCB.00_118_A00_customer.exe
SHA1:
Not Available
FCB.00_118_A00_customer.exe
SHA-256:
Not Available
FCB.00_118_A00_customer.exe

By downloading, you accept the terms of the Dell Software License Agreement.