Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
LSI 9265-8i SAS RAID Card firmware
LSI 9265-8i SAS RAID Card firmware
Release Date 2/19/2013
Importance: Recommended
Version: 23.7.0-0035,A01

The following formats are available for the file you have selected

File Format: Floppy Download File Download File
File Name:

23.7.0-0035_SAS_FW_IMAGE_APP_3.190.15-1776.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 27MB

File Format: Plain-Text Download File Download File
File Name:

EndUser LicenseAgreementType S_Rev. 040512.txt

Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 11KB

Previous Versions

No previous version available.

Description

LSI 9265-8i SAS RAID Card firmware

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Compatibility

Systems
PowerEdge C6145
PowerEdge C8000
Operating Systems
Not Applicable

Applies to

  • LSI 9265-8i MegaRaid SAS

Fixes & Enhancements

1.Dont log capacity change event post rebuild completion. 2.Log commission event only if Rebuild will start on the PD. 3.Clean up bad block list during background init/check consistency failure 4.Reverted back the changes of the issues: SCGCQ00287136 & SCGCQ00287140. 5.SATA BBM list corruption 6.Stressing test on degrade raid with drives or rebuilding on drives will cause firmware hang 7.T-bolt firmware : makes unconfigured bad (foreign) to unconfigured bad on reboot. 8.cannot make the CacheCade configured PD as unconfigured bad even pulling it out during system online. 9.Hot Spare lost after FW update 10.Pulling cable when maintainpdfailhistory=1 create wrong state in arrays. 11.Memory test does not execute when performing FW diagnostics. 12.MFC variable enableSSCWB was not getting updated when updated via megaSCU 13.Code review: DC : Set RDM_FLAGS_FUA_REQ in immediate IO path in rebuilding drive case. 14.Controller does not come up while a PD Erase is in progress_Debug Firmware

Installation instructions

            
Use MegaCLI to flash the SAS controllers. 
please unzip the MegaCLI update utility  in attachment.

Command syntax:  MegaCli -adpfwflash -f mr2208fw.rom -a0            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
1202385f68ac221bc67a0ab0f9d79b64
23.7.0-0035_SAS_FW_IMAGE_APP_3.190.15-1776.exe
SHA1:
cc7903ebc9e924f265db86d7f8b3ad6547e0aad0
23.7.0-0035_SAS_FW_IMAGE_APP_3.190.15-1776.exe
SHA-256:
17bb60ca77d368ccdf2ab32e14dd5e5658014da0558678967109a238439e4d97
23.7.0-0035_SAS_FW_IMAGE_APP_3.190.15-1776.exe

By downloading, you accept the terms of the Dell Software License Agreement.