Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell Dual-Port 10GE Daughter Mezzanine Adapter (82599) support Windows Driver 17.3
this is NIC82599 use on C6100, C6105, C6145 C6200, OS supported is Windows x86_64 English
Release Date: 2/19/2013
Importance: Recommended
Version: 17.3 See Previous Versions

The following formats are available for the file you have selected

File Format: Floppy Download File Download File
File Name:

509252_Rel17.3OEMGenPV__278880.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 156MB

File Format: Plain-Text Download File Download File
File Name:

EndUser LicenseAgreementType S_Rev. 040512.txt

Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 11KB

Previous Versions

16.8, A00
<ul><li><b>Vendor Version :</b> 16.8</li><li><b>Dell Version :</b> A00</li></ul>
4/20/2012 12:31:17 PM

Description

this is NIC82599 use on C6100, C6105, C6145 C6200, OS supported is Windows x86_64 English

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

this is NIC82599 use on C6100, C6105, C6145 C6200, OS supported is Windows x86_64 English

Compatibility

Systems
PowerEdge C6105
PowerEdge C6145
PowerEdge C6220
PowerEdge C8000
Operating Systems
MS Windows 2008 R2

Applies to

  • Dual-Port 10GE Daughter Mezzanine Adapter

Fixes & Enhancements

The following features are now available in supported kernels: - Native VLANs - Channel Bonding (teaming) - SNMP - Generic Receive Offload - Data Center Bridging

Installation instructions

            
Installing Drivers and Intel(R) PROSet for Windows* Device Manager
==================================================================

You must have administrator rights to install or use Intel PROSet for Windows Device Manager. Intel recommends the following procedure for installing drivers:
 1) Cancel any Found New Hardware Wizard screens that open.
 2) Start the autorun located on the CD or in your download directory.
 3) Click "Install Drivers and Software" and follow the instructions in the install wizard.

Intel(R) PROSet functionality is integrated with the Windows Device Manager. To configure Intel(R) Ethernet Adapters and Controllers, open the Windows Device Manager. Do not open adapter, team, or VLAN properties from the network control panel as you may be prompted to reboot your system.

You must upgrade PROSet when upgrading drivers. Failure to do so will result in instability and missing tabs in Windows Device Manager.

For software and driver versions prior to Release 16.2, if you have Fibre Channel over Ethernet (FCoE) boot enabled on any devices in the system, you will not be able to upgrade your drivers. You must disable FCoE boot before upgrading your ethernet drivers. This issue is resolved in Release 16.2 and beyond.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
24463bafec4b440a0106fd4bfe86c97a
509252_Rel17.3OEMGenPV__278880.exe
SHA1:
7c05e949aec51631687ed6ce2506ae31265e8816
509252_Rel17.3OEMGenPV__278880.exe
SHA-256:
361a4c5cdf8be0fcbd4a95583c2947fb9e629ddde90a5a84a9af9b89cfa71bd2
509252_Rel17.3OEMGenPV__278880.exe

By downloading, you accept the terms of the Dell Software License Agreement.