Dell QDR Network Dual-Port Daughter Mezzanine Adapter Firmware 2.9.1
this firmware is for Dell QDR Dual-Port Daughter Mezzanine Adapter in PowerEdge C6200 & C6220
| Release Date: | 9/3/2012 |
| Importance: | Recommended |
| Version: | 2.9.1000,A01 |
The following formats are available for the file you have selected
| File Format: | Floppy |
Download File
|
| File Name: |
2.9.1000.exe |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to create a set of floppy diskettes, and then use the diskettes to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 1MB | |
Previous Versions
No previous version available.
Description
this firmware is for Dell QDR Dual-Port Daughter Mezzanine Adapter in PowerEdge C6200 & C6220
Level of Importance:Recommended
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).
Important Information
QDR Dual-Port Daughter Mezzanine Adapter -MCQH29 XDR FW2.9.1
Compatibility
| Systems Cloud Products C6220 Cloud Products C8000 | Operating Systems Not Applicable |
Applies to
- QDR dual port daughter Card
- ASSY,PWA,MEZZ,DTRBD,MLNX,C6145
- ASSY,PWA,MEZZ,QDR,DP,MLNX,C622
Fixes & Enhancements
1.Wrong UAR mapping in pages larger than 4K: Blueflame did not work on UAR pages larger than 4K
2.Congestion Notification Packet may cause HCA to stall under extreme conditions
3.When in unsolicited mode a completion message is not sent on every completion
4.PCIe compatibility issue with a specific PCIe root complex
5.HCA may hang upon CLOSE_PORT command during data stress (ID 91657)
6.Ethernet: Potential packet drops in Pause mode
7.QUERY_DEV_CAP.log_max_bf_regs_per_page fixed from 8 to 3
8.PCIe slow handling of configuration cycles may cause NMI
9.Potential delay in responding to configuration cycles upon data stress
10.High Bit Error Rate on active cables
11.PCI Express compliancy: The ConnectX device may transmit before the PCI Express receiver detect is enabled
12.Slow VPD performance might cause NMI
13.Possible wrong link state during link bring up
14.High Bit Error Rate on active cables
15.Potential delay in responding to configuration cycles upon data stress
16.RoCE issue:Wrong GID in VPI
17.RoCE issue:Missing GUIDs in Ethernet only cards
Installation Instructions
please reference ConnectX-FW-2_9_1000-release_notes.pdf
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
5f5c772b68ad668fe556fdb298e85e51
|
2.9.1000.exe
|
|
SHA1:
|
228ce18bd48e99b46d0ae2ffe0e0e6caebb5a0cf
|
2.9.1000.exe
|
|
SHA-256:
|
Not Available
|
2.9.1000.exe
|
My Download List
0
files in my list
Drivers Quick Links