Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
INTEL SSD S320 firmware 0362 Dell A00
The Intel SATA Solid-State Drive firmware update tool provides the latest firmware for the following Intel Solid-State Drives in all capacities: Intel X25-M X18-M SATA Solid-State Drive on 50nm (black case) Intel X25-E SATA Solid-State Drive on 50nm (black case) Intel X25-M X18-M SATA Solid-State Drive on 34nm (silver case) Intel X25-V Value SATA Solid-State Drive on 34nm Intel Solid-State Drive 320 Series
Release Date 12/3/2013
Importance: Recommended
Version: 0362,A00

The following formats are available for the file you have selected

File Format: Plain-Text Download File Download File
File Name:

EndUser LicenseAgreementType S_Rev. 040512.txt

Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 11KB

Previous Versions

No previous version available.

Description

The Intel SATA Solid-State Drive firmware update tool provides the latest firmware for the following Intel Solid-State Drives in all capacities: Intel X25-M X18-M SATA Solid-State Drive on 50nm (black case) Intel X25-E SATA Solid-State Drive on 50nm (black case) Intel X25-M X18-M SATA Solid-State Drive on 34nm (silver case) Intel X25-V Value SATA Solid-State Drive on 34nm Intel Solid-State Drive 320 Series

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

N/A

Compatibility

Systems
PowerEdge C5220
PowerEdge C5220
PowerEdge C6105
PowerEdge C6105
PowerEdge C6145
PowerEdge C6145
PowerEdge C6220
PowerEdge C6220
PowerEdge C8000
PowerEdge C8000
Operating Systems
Not Applicable

Applies to

  • Dell Device
  • Intel 320 Serial 2.5" 160GB SSD

Fixes & Enhancements

Initial Release

Installation instructions

            
1. Load the .ISO image onto a blank CD (CD-R or CD-RW) using
CD-ROM burning software of your choice.
2. Ensure the Intel SSD is attached to a SATA port in the system.
For best results, ensure the SATA port is a native control
port of your south bridge controller (generally
SATA ports 0 through 4).  SATA ports attached to a third-party
SATA controller bridge chip or add-in SATA controller
expansion cards are not recommended for use when updating
the firmware. For more details, consult your system technical
documentation.
3. Insert the Intel SATA SSD Firmware Update CD into the system.
4. Ensure the CD-ROM drive is enabled as a bootable device in BIOS
and the CD-ROM boot priority is ahead of the drive containing
the OS boot partition.  For more details, consult your
system documentation.
5. Complete a safe system shutdown and power off completely, count to
10 (seconds), and then reboot the system. A restart or warm reset
(CTRL-ALT-DEL) is not adequate.
6. Power on your system to start the update process.
- The tool will prompt you through the update process
for all the SSDs that qualify for the firmware update
in your system.
- To verify that the firmware update is complete, power down per step 5
above with the CD still installed and let the
firmware update software scan for SSDs in your system
again. The scan should now display your SSD and the
firmware should now show the new firmware number for your
specific SSD.
- Once the firmware has been verified, remove the CD and
power down the system again.
- If you changed SATA port mode from AHCI to "Compatibility" or
or "Legacy" mode for the firmware update, ensure you
change the port back to AHCI mode for best performance.
Note: For computers booting into Windows 7 after a firmware update,
a message appears when the operating system starts that prompts
you to restart the computer. Restart when prompted.
If you have questions about any of these steps, please contact
Intel Customer Support for further assistance at the following
website: http://www.intel.com/go/ssdsupport/

4.   INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials
(collectively, the "Software") until you have carefully read
the following terms and conditions. By loading or using the
Software, you agree to the terms of this Agreement. If you
do not wish to so agree, do not install or use the Software.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
c2ffe409366d225552ac6ed58f206b58
EndUser LicenseAgreementType S_Rev. 040512.txt
SHA1:
88522584d2ed8711c12c71ae9e569116a26e7b0a
EndUser LicenseAgreementType S_Rev. 040512.txt
SHA-256:
b85aae437264a3f053c9efec6b47fa1ba6610de28b749a06c2fec3dfc87bf333
EndUser LicenseAgreementType S_Rev. 040512.txt

By downloading, you accept the terms of the Dell Software License Agreement.