Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell TL2000/4000, v.9t30, A12
Firmware update for the TL2000/TL4000 Tape Library and drives that fix an issue where the RMU would become inaccessible. Dell PowerVault TL2000/TL4000 Library and Drive Firmware Release A12 (September '10)and ITDT-DCR1.2.0.006 FW Revisions: Library FW = 9T30 Drive FW: LT03 FH drives = 93G6 LT03 HH drives = 93G7 LT04 FH drives = A232 LT04 HH drives = A233 LTO5 drives = A422
Release Date: 9/17/2010
Importance: Urgent
Version: 9t30,A12 See Previous Versions

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

R282043.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 73MB

Previous Versions

9.30, A11
<ul><li><b>Vendor Version :</b> 9.30</li><li><b>Dell Version :</b> A11</li></ul>
5/17/2010 2:28:22 PM

Description

Firmware update for the TL2000/TL4000 Tape Library and drives that fix an issue where the RMU would become inaccessible. Dell PowerVault TL2000/TL4000 Library and Drive Firmware Release A12 (September '10)and ITDT-DCR1.2.0.006 FW Revisions: Library FW = 9T30 Drive FW: LT03 FH drives = 93G6 LT03 HH drives = 93G7 LT04 FH drives = A232 LT04 HH drives = A233 LTO5 drives = A422

Level of Importance:Urgent

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.

Important Information

Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses. Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support. Provides support for the new Library Controller Board (LCB) See Dell PowerVault A07 Release Notes December'08 file for a full release details To install ITDT, a suitable version of Java is required for both Windows and Linux. ***** LINUX INSTALLATIONS ONLY ***** The default install location for the current release of ITDT has changed in Linux based installations. The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre The symbolic link creation example for ITDT in Section 2.1 of the readme file should be: IBM JRE: $ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE: $ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre

Compatibility

Systems
PowerEdge 1800
PowerEdge 6650
PowerEdge 6950
PowerEdge 7250
PowerEdge M1000E
PowerVault 745N
PowerVault NX3100
Operating Systems
Not Applicable

Applies to

  • KIT,ACC,EN,ACTVN,TL2K,SLVR
  • KIT,ACC,EN,ACTVN,TL4K,SLVR
  • TL2000/4000

Fixes & Enhancements

Fixed an issue where the RMU would become inaccessible.

Installation instructions

            
Hard Drive Installation (via WinZip) with HTML Pop-Up Window

Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to 
disk (Windows XP users, click Save) and click OK.  The Save In: window 
appears. 
3.From the Save In: field, click the down arrow then click to 
select Desktop and click Save.  The file will download to your desktop.
4.If the Download Complete window appears, click Close.  The file 
name icon appears on your desktop.

Install
1.Double-click the new icon on the desktop
The Self-Extractor window appears. 
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to 
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK.  If the 
directory doesn't exist, you'll be prompted to create one. Click Yes. A 
Self Extractor window appears and indicates C:\DELL\DRIVERS files were 
extracted. 
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears. 
2.Click the Install Now button.   A File Download window appears. 
3.Click Run this program from its current location and click OK.  
The Security Warning window appears. 
4.Click Yes.  The InstallShield Wizard window appears. 
5.Follow the on-screen instructions.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
486c8689ce6fc4b1497ff7830dd7182a
R282043.exe
SHA1:
86a1b98ea513214cc7aeaf2cc678f4bc46453a2f
R282043.exe
SHA-256:
f8f05e78c8cca1ecded853e4885f0e6f6d05022293de1ae840ce017263637c7f
R282043.exe

By downloading, you accept the terms of the Dell Software License Agreement.