Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
PowerConnect,M8024-k,v5.0.0.4,A08
This firmware is for the M8024-K version of PowerConnect switch and has new features and bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
Release Date 8/29/2012
Importance: Recommended
Version: v5.0.0.4,A08 See Previous Versions

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

PCM8024kv5.0.0.4a08.zip

Description: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Download Type: HTTP
File Size: 13MB

Previous Versions

v4.2.2.3, A07
<ul><li><b>Vendor Version :</b> v4.2.2.3</li><li><b>Dell Version :</b> A07</li></ul>
5/11/2012 6:44:37 PM
4.2.1.3, A06
<ul><li><b>Vendor Version :</b> 4.2.1.3</li><li><b>Dell Version :</b> A06</li></ul>
2/10/2012 8:17:42 PM
4.2.0.4, A05
<ul><li><b>Vendor Version :</b> 4.2.0.4</li><li><b>Dell Version :</b> A05</li></ul>
1/16/2012 5:50:12 PM

Description

This firmware is for the M8024-K version of PowerConnect switch and has new features and bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"

Compatibility

Systems
PowerConnect M8024-K
PowerEdge M1000E
Operating Systems
Not Applicable

Applies to

  • PowerConnect M8024-K

Fixes & Enhancements

Fixes and Enhancement: Fixes - OpenManage UI does not accept blank space character for port description. - "show spanning-tree detail" counters are non-zero for inactive interfaces. - Unable to remove 0.0.0.0 as default gateway on OOB interface using the web. - When connecting via SSH, the user is not prompted to acknowledge the MOTD - "encapsulation" command is unavailable in interface range mode - M8024-k OpenManage Web UI stack view display - "spanning-tree transmit hold-count" command's value is not reflected in show command - Inconsistent behavior in single and range interface mode of "spanning-tree port - CLI command "no passwords strength exclude-keyword" requires - Inline help for "spanning-tree loopguard" is incorrect. - Some of the options of "show ip pim" command are not available in user EXEC mode. - Configuration command "logging " accepts more than 63 characters. - dot1dTpPortMaxInfo is displaying maximum frame size that includes MAC header. - If a user attempts to create a certificate request with information that is not identical to the key generated, the user is not given an error/ informative response letting them know there is a conflict between their key and their request. - OIDagentInventorySupportedUnitExpected CodeVer provides incorrect display string 1.0.176.0 - 1. Changes are not applied to the correct interfaces on the pages "System->sFlow->Sampler Configuration" "System->sFlow->Poll Configuration" 2. Incorrect error message is displayed when not configured Receiver index is applied to interface on "System->sFlow->Poll Configuration" page. - "show ip route configured ...longer-prefixes" reports that default gateway is not configured, which is incorrect. - CLI command "show ip route 192.168.2.2 /24" not ignoring host bits. - "ipv6 pim join-prune interval" command does not work - Macro input string does not accept more than 20 characters - startup-config failed error message is displayed when finishing the Dell Easy Setup Wizard - In stacking environment, "show system temperature" command output is corrupted - Error message for port enable / disable on IE on 8024F combo ports - Alignment issues in the output of "show voice vlan interface" command - CLI command "show ip igmp snooping" output is truncated. - vrrp ip command accepts invalid IP addresses - CLI command "isdp enable" does not work for a range of ports - "show interface Priority-Flow-Control" command output is not formatted correctly - CLI command "show ip route 192.168.2.2 /24" not ignoring host bits. - Port channel goes down during master failover. - switches rebooting - possible crash dump w/ emWeb - general mode vlan does not show up after a reload, it shows up in access vlan - SNMP OIDs 1.3.6.1.4.1.674.10895.3000.1.2.110.7.x causing switch crash - Stack ARP Problem - Stack member units port display is missing in web GUI. - No response to ICMP with jumbo (ping) - Ports connected to Intel X520 NIC do not return online after reboot. - switch reboots randomly. Enhancements - 802.1Qaz (ETS) on 8100 series - Added Native EEE Support for the PC8100 10GBaseT Ports - Support for 40 Gig (QSFP+) interfaces - Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset. - Local Preference for LAG - Full Private VLAN - CLI output filtering - Routing Improvements for OSPF - UDLD - Administrative Profiles - AAA Authorization - TACACS+ Accounting - Stacking over QSFP+ ports - QSFP+ diagnostics - sFlow Support on Port Channels

Installation instructions

            
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
82d872fa083700ac8b8b2926e4035c8b
PCM8024kv5.0.0.4a08.zip
SHA1:
f49187d2d940705d64d4cdf6c43b01be34b177c8
PCM8024kv5.0.0.4a08.zip
SHA-256:
0339219fe1fde9805ab19f787af51fa4a0361666bc9e5c80b6588604ffad4462
PCM8024kv5.0.0.4a08.zip

By downloading, you accept the terms of the Dell Software License Agreement.