Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell PERC H200 Integrated Modular firmware
This package provides the Dell PERC H200 Integrated Modular Firmware Release
Release Date: 6/3/2011
Importance: Urgent
Version: 07.02.42.00,A04

The following formats are available for the file you have selected

File Format: GnuPG Signature for Linux Update Package Download File Download File
File Name:

RAID_FRMW_LX_R294622.BIN.sign

Description: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Download Type: HTTP
File Size: 0.2KB

File Format: Hard-Drive Download File Download File
File Name:

DELL_PERC-H200-INTEGRATED-MO_A04_R294622.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 854KB

File Format: Rel-Notes-Text Download File Download File
File Name:

R294622.txt

Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 2KB

File Format: Update Package for Microsoft® Windows® Download File Download File
File Name:

RAID_FRMW_WIN_R294622.EXE

Description: Dell Update Packages in Microsoft Windows 32-bit format can be deployed on Microsoft 64-bit operating systems by implementing the WOW64 emulation applications. WOW64 is a standard feature on most Microsoft operating systems.
Download Type: HTTP
File Size: 5MB

File Format: Update Package for Red Hat Linux Download File Download File
File Name:

RAID_FRMW_LX_R294622.BIN

Description: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Download Type: HTTP
File Size: 3MB

Previous Versions

No previous version available.

Description

This package provides the Dell PERC H200 Integrated Modular Firmware Release

Level of Importance:Urgent

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.

Important Information

- When installing an OS, be sure to select a Boot Device in CTRL+C. In CTRL+C, under SAS Topology, scroll down to the desired Physical Disk or Virtual Disk and enter ALT+B to select the device as your Boot Device. - Resynch, Background Init and Consistency Check processes will always occur serially. - When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details. - When adding a PERC H200 controller to a system, either by physically adding an adapter or by enabling the integrated SAS controller in the system BIOS, the new controller may need to be added to the controller boot order in the PERC H200 BIOS configuration Utility. At POST, hit CTRL-C to enter the utility and verify or modify the controller boot order. - The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. * Linux systems running one or more applications that interact with SCSI devices in certain ways are known to cause a kernel panic situation. Therefore, it is recommended that you stop Server Administrator and its Storage Management Service before running storage controller firmware update packages. To stop the Dell OpenManage(TM) Server Administrator service, run "omconfig system webserver action=stop" To start the Server Administrator service, run "omconfig system webserver action=start" To stop the Server Administrator Storage Management Service, run "/etc/init.d/dataeng stop" To start the Server Administrator Storage Management Service, run "/etc/init.d/dataeng start"

Compatibility

Systems
External OEMR R910
PowerEdge M610
PowerEdge M610x
PowerEdge M710
PowerEdge M910
PowerEdge M915
PowerVault DL2200
PowerVault DL2200 CommVault
Operating Systems
Not Applicable

Applies to

  • PERC H200 Integrated Modular

Fixes & Enhancements

Fixes: - Corrects a potential scenario where a drive may repeatedly fail during i/o. - Implementation for blocking of >2 TB HDDs.

Installation instructions

            
Performing the Firmware Upgrade

NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.

1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.

Zip pack:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your 
hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the 
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully 
unzipped will appear.
5. Click the OK button to exit from the installer.

Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.


Windows Update Package:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to 
your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window 
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
0fe62bb81f86f5bb944b790714e6d2d7
DELL_PERC-H200-INTEGRATED-MO_A04_R294622.exe
SHA1:
e627cc0d90d4f3a60b853462e912d7d70dee04b4
DELL_PERC-H200-INTEGRATED-MO_A04_R294622.exe
SHA-256:
Not Available
DELL_PERC-H200-INTEGRATED-MO_A04_R294622.exe

By downloading, you accept the terms of the Dell Software License Agreement.