Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell PowerVault 120T DLT Autoloader, v.D116, A01
Firmware for the Dell PowerVault 120T DLT4000/7000 autoloader. This release contains firmware for the autoloader, DLT4000 tape drive, and DLT7000 tape drive.
Release Date 7/23/2004
Importance: Optional
Version: D116,A01 See Previous Versions

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

R82137.EXE

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 4MB

Previous Versions

d116, D116
<ul><li><b>Vendor Version :</b> d116</li><li><b>Dell Version :</b> D116</li></ul>
7/24/2000 9:19:01 AM

Description

Firmware for the Dell PowerVault 120T DLT4000/7000 autoloader. This release contains firmware for the autoloader, DLT4000 tape drive, and DLT7000 tape drive.

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Important Information

Please view the installation instructions included with this firmware release for important information. This firmware update must be run on a computer system that is attached to the PowerVault 120T. The utilities included with this package only run in Windows operating systems. It is important that you power cycle the PowerVault 120T tape autoloader and all systems connected to it once the firmware update has completed.

Compatibility

Systems
Operating Systems
Not Applicable

Applies to

  • PowerVault 120T DLT Autoloader

Fixes & Enhancements

No fixes/enhancements. This is a repackaging of previously released firmware.

Installation instructions

            
Custom Instructions for R82137.EXE:

Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.

Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to upzip the files (the default location is x:\dell\drivers\R82137).
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.

Installation
1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:

NOTE: x: represents the drive where the files were unzipped

PowerVault 120T Tape Autoloader Application Code D116 is located in x:\Dell\Drivers\R82137\Autoloader 
PowerVault 120T DLT4000 Tape Drive Firmware D782 (v130) is located in x:\Dell\Drivers\R82137\DLT4000 
PowerVault 120T DLT7000 Tape Drive Firmware 2561 (v97) is located in x:\Dell\Drivers\R82137\DLT7000            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
R82137.EXE
SHA1:
Not Available
R82137.EXE
SHA-256:
Not Available
R82137.EXE

By downloading, you accept the terms of the Dell Software License Agreement.