Dell PowerVault 120T DLT Autoloader, v.D116, A01
Firmware for the Dell PowerVault 120T DLT4000/7000 autoloader.
This release contains firmware for the autoloader, DLT4000 tape drive, and DLT7000 tape drive.
| Release Date: | 7/23/2004 |
| Importance: | Optional |
| Version: | D116,A01 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
R82137.EXE |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 4MB | |
Previous Versions
No previous version available.
Description
Firmware for the Dell PowerVault 120T DLT4000/7000 autoloader.
This release contains firmware for the autoloader, DLT4000 tape drive, and DLT7000 tape drive.
Level of Importance:Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.
Important Information
Please view the installation instructions included with this firmware release for important information. This firmware update must be run on a computer system that is attached to the PowerVault 120T. The utilities included with this package only run in Windows operating systems. It is important that you power cycle the PowerVault 120T tape autoloader and all systems connected to it once the firmware update has completed.
Compatibility
| Systems PowerVault 120T DLT4000 Autoloader PowerVault 120T DLT7000 Autoloader | Operating Systems Not Applicable |
Applies to
- PowerVault 120T DLT Autoloader
Fixes & Enhancements
No fixes/enhancements. This is a repackaging of previously released firmware.
Installation Instructions
Custom Instructions for R82137.EXE:
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to upzip the files (the default location is x:\dell\drivers\R82137).
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation
1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:
NOTE: x: represents the drive where the files were unzipped
PowerVault 120T Tape Autoloader Application Code D116 is located in x:\Dell\Drivers\R82137\Autoloader
PowerVault 120T DLT4000 Tape Drive Firmware D782 (v130) is located in x:\Dell\Drivers\R82137\DLT4000
PowerVault 120T DLT7000 Tape Drive Firmware 2561 (v97) is located in x:\Dell\Drivers\R82137\DLT7000
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
Not Available
|
R82137.EXE
|
|
SHA1:
|
Not Available
|
R82137.EXE
|
|
SHA-256:
|
Not Available
|
R82137.EXE
|
My Download List
0
files in my list
Drivers Quick Links