Dell PowerVault 128T Tape Library, v.1.62.D, A05
Firmware for the PowerVault 128T Library (fibre bridge, picker, and controller), LTO Tape Drive, and SDLT220 Tape Drive.
This new firmware package offers new library firmware to address library picker issues, and new SDLT drive firmware to address stuck tape issues.
| Release Date: | 9/23/2004 |
| Importance: | Urgent |
| Version: | 1.62.D,A05 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
R83113.EXE |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 11MB | |
Previous Versions
No previous version available.
Description
Firmware for the PowerVault 128T Library (fibre bridge, picker, and controller), LTO Tape Drive, and SDLT220 Tape Drive.
This new firmware package offers new library firmware to address library picker issues, and new SDLT drive firmware to address stuck tape issues.
Level of Importance:Urgent
Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.
Important Information
This firmware update must be run on a computer system that is attached to the PowerVault 128T. It is recommended that you power cycle the PowerVault 128T and all systems connected to it once the firmware update has completed.
Compatibility
| Systems PowerVault 128T Tape Library | Operating Systems Red Hat Linux 6.1 Red Hat Linux 6.2 Red Hat Linux 7.0 Red Hat Linux 7.1 Red Hat Linux 7.2 Novell Netware MS Windows Server 2003 MS Windows NT 4.0 MS Windows 2000 |
Applies to
- PowerVault 128T Tape Library
Fixes & Enhancements
PowerVault 132T Tape Library Firmware Release Notes
This release contains the following firmware versions:
*PowerVault 128T Library Firmware 1.62.D
*PowerVault 128T LTO Drive Firmware E32L
*PowerVault 128T SDLT220 Drive Firmware 4949 (v73)
---
PowerVault 128T Library Firmware 1.62.D
Previous version: 1.41.D
* Added hourly picker brush maintence cycle when library is idle. This is to prevent build up of oxides on brush which could result in a picker power failure.
* Firmware will try to recover from transport assembly (picker) power failures.
* Java 1.4.1_01 or later runtime plug-in in required to view the RMC after firmware update is complete.
* Fixed ‘transport empty’ errors on moves
* Fixed “Failed to unload tape from drive" error when moving SDLT tapes.
* Fixed intermittent issue where FC devices could be displayed multiple times on the Discovery page.
* Fixed situation in which a large read (>256KB) or other long commands may cause a timeout or overlap condition.
* Fixed "Queue Full" error when ABTS was received for a command that was still active at the drive.
* New default configuration settings for Fibre Bridge:
Number of control LUNs: 0
AF LUN ID: 3
Port Mode: N_Port
---
PowerVault 128T LTO Drive Firmware E32L
Previous version: E32L
* The LTO Drive firmware did not change from the previous release
---
PowerVault 128T SDLT220 Drive Firmware 4949 (v73)
Previous version: 3131 (v49)
The following problems are fixed:
* Improved Read Error Detection
* Corrected a condition in which a false failure is reported during unload scenarios
* Improved small block ( < 32 bytes) write conditions
Installation Instructions
Custom Instructions for R83113.EXE:
Hard Drive Installation (via WinZip) with HTML Pop-Up Window for
R83113.EXE
Download
1.Click Download Now, to download the file.
2.At the Export Compliance Disclaimer window, click Yes, I Accept
this Agreement.
3.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
4.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R83113.EXE.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R83113.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R83113 files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
SHA1:
|
Not Available
Not Available
|
R83113.EXE
R83113.EXE
|
My Download List
0
files in my list
Drivers Quick Links