Dell Support Drivers & Downloads Driver File Formats

Driver Details

TL2000 and TL4000 library and drive firmware and ITDT-DCR. Library Firmware = B.20 LTO5 Drive Firmware = BBNF LTO4HHv2 Drive Firmware = BBNF LTO4FH Drive Firmware = BBH4 LTO4HHv1 Drive Firmware = BBH5 LTO3HHv2 Drive Firmware = BBNF LTO3FH Drive Firmware = 93GP LTO3HHv1 Drive Firmware =93GQ
Release Date 7/25/2012
Importance: Urgent
Version: B.20,A16

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:


Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 100MB

Previous Versions

No previous version available.


TL2000 and TL4000 library and drive firmware and ITDT-DCR. Library Firmware = B.20 LTO5 Drive Firmware = BBNF LTO4HHv2 Drive Firmware = BBNF LTO4FH Drive Firmware = BBH4 LTO4HHv1 Drive Firmware = BBH5 LTO3HHv2 Drive Firmware = BBNF LTO3FH Drive Firmware = 93GP LTO3HHv1 Drive Firmware =93GQ

Level of Importance:Urgent

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.

Important Information

Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses. Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support. Provides support for the new Library Controller Board (LCB) See Dell PowerVault A07 Release Notes December'08 file for a full release details To install ITDT, a suitable version of Java is required for both Windows and Linux. ***** LINUX INSTALLATIONS ONLY ***** The default install location for the current release of ITDT has changed in Linux based installations. The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre The symbolic link creation example for ITDT in Section 2.1 of the readme file should be: IBM JRE: $ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE: $ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre


External OEMR XL R520
PowerVault NX3300
Operating Systems
Novell SuSE Linux ES 11
MS Windows 2008 x64
Red Hat Ent Linux 4
Red Hat Ent Linux 4.5
Red Hat Ent Linux 4.6
Suse Linux ES 9
Suse Linux ES 10
Not Applicable
Red Hat Ent Linux 4.7
Red Hat Ent Linux 5.2
Red Hat Ent Linux 6
Red Hat Ent Linux 5
Red Hat Ent Linux 5.1
Novell SuSE Linux ES 10
MS Windows 2008 x86
MS Windows Server 2003
MS Windows 2000
MS Windows 2008 R2
MS Windows 2003 x64

Applies to

  • TL2000/4000

Fixes & Enhancements

Library improvements include: - Fix for SNMP info for community names longer than 13 characters - Proper library\drive response for a read failure on encrypted media Several drive improvements and enhancements: Several drive fixes which include: - Stuck tape prevention - I/O error recovery - Error Reporting

Installation instructions

Hard Drive Installation (via WinZip) with HTML Pop-Up Window

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to 
disk (Windows XP users, click Save) and click OK.  The Save In: window 
3.From the Save In: field, click the down arrow then click to 
select Desktop and click Save.  The file will download to your desktop.
4.If the Download Complete window appears, click Close.  The file 
name icon appears on your desktop.

1.Double-click the new icon on the desktop
The Self-Extractor window appears. 
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to 
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK.  If the 
directory doesn't exist, you'll be prompted to create one. Click Yes. A 
Self Extractor window appears and indicates C:\DELL\DRIVERS files were 
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears. 
2.Click the Install Now button.   A File Download window appears. 
3.Click Run this program from its current location and click OK.  
The Security Warning window appears. 
4.Click Yes.  The InstallShield Wizard window appears. 
5.Follow the on-screen instructions.            


To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.

By downloading, you accept the terms of the Dell Software License Agreement.