Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Dell PowerVault 51F / 56F Firmware, v. 2.5.0d, A00
PV 51F/ PV 56F FC-switch firmware.
Release Date 3/6/2002
Importance: Optional
Version: 2.5.0d,A00

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:

v2_5_0d.exe

Description: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Download Type: HTTP
File Size: 2MB

Previous Versions

No previous version available.

Description

PV 51F/ PV 56F FC-switch firmware.

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Compatibility

Systems
PowerVault 51F (8P Fibre Channel Switch)
PowerVault 56F (16P Fibre Channel Switch)
PowerVault Storage Area Network (SAN)
Operating Systems
Not Applicable

Applies to

  • PowerVault 51F / 56F Firmware

Fixes & Enhancements

New version to support Dell PV and Dell|EMC.

Installation instructions

            
Steps to update the switch from v2.2.1c/v2.2.1a to v2.5.0d
1. Execute the self-extracting zip file v2_5_0d.exe to extract the 
following files into a folder of your choice:

rshd.exe
cat.exe
v2.5.0d
Readme.doc

2. Verify that the v2.5.0d firmware file has been extracted to the same 
directory as rshd.exe and cat.exe
3. Start rshd.exe from the command line.
4. Telnet and logon to the switch as Admin.
5. Execute the firmwareDownload command from the Telnet CLI of the switch. 
The firmwareDownload command has be following command line format.
  
   firmwareDownload "host IP address", "user name", "filename"

The “user name” can be set to “user”. The command will prompt you for 
additional information no arguments are specified.
 
6. After the firmware download has been completed, reboot the switch 
(using the reboot command) for the new firmware to be activated. 

If you have a SAN with redundant paths I/O will failover to the alternate 
path when the switch is rebooted. As an additional precaution you may want 
to move all I/O to the alternate path prior to the reboot.

7. Once the switch has rebooted, login to the switch and verify the 
firmware version by using the version command.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
v2_5_0d.exe
SHA1:
Not Available
v2_5_0d.exe
SHA-256:
Not Available
v2_5_0d.exe

By downloading, you accept the terms of the Dell Software License Agreement.