Dell PowerVault 51F / 56F Firmware, v. 2.5.0d, A00
PV 51F/ PV 56F FC-switch firmware.
| Release Date: | 3/6/2002 |
| Importance: | Optional |
| Version: | 2.5.0d,A00 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
v2_5_0d.exe |
|
| Description: | This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory. | |
| Download Type: | HTTP | |
| File Size: | 2MB | |
Previous Versions
No previous version available.
Description
PV 51F/ PV 56F FC-switch firmware.
Level of Importance:Optional
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.
Compatibility
| Systems PowerVault 51F PowerVault 56F PowerVault Storage Area Network | Operating Systems Not Applicable |
Applies to
- PowerVault 51F / 56F Firmware
Fixes & Enhancements
New version to support Dell PV and Dell|EMC.
Installation Instructions
Steps to update the switch from v2.2.1c/v2.2.1a to v2.5.0d
1. Execute the self-extracting zip file v2_5_0d.exe to extract the
following files into a folder of your choice:
rshd.exe
cat.exe
v2.5.0d
Readme.doc
2. Verify that the v2.5.0d firmware file has been extracted to the same
directory as rshd.exe and cat.exe
3. Start rshd.exe from the command line.
4. Telnet and logon to the switch as Admin.
5. Execute the firmwareDownload command from the Telnet CLI of the switch.
The firmwareDownload command has be following command line format.
firmwareDownload "host IP address", "user name", "filename"
The “user name” can be set to “user”. The command will prompt you for
additional information no arguments are specified.
6. After the firmware download has been completed, reboot the switch
(using the reboot command) for the new firmware to be activated.
If you have a SAN with redundant paths I/O will failover to the alternate
path when the switch is rebooted. As an additional precaution you may want
to move all I/O to the alternate path prior to the reboot.
7. Once the switch has rebooted, login to the switch and verify the
firmware version by using the version command.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
Not Available
|
v2_5_0d.exe
|
|
SHA1:
|
Not Available
|
v2_5_0d.exe
|
|
SHA-256:
|
Not Available
|
v2_5_0d.exe
|
My Download List
0
files in my list
Drivers Quick Links