Instructions for R118591.EXE

Download 

1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Extract Files 
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 
2. Click Continue. 
3. Specify the location to unzip the files. 
4. Click on the OK button to extract files.
   After the files are extracted the message all files were successfully unzipped will appear. 
5. Click the OK button to exit from the installer. 


New Installation:

1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers. 
4. When the Windows Setup window is displayed, Press S to specify additional device(s). 
5. Insert the driver diskette and press ENTER. 
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices. 
7. If there are any additional devices to be installed, specify them now by pressing S.
8. When all devices are specified, continue to the next step by pressing ENTER. 


Update Installation:

1. Open "Device Manager"
2. Open "SCSI and RAID Contollers"
3. Select "Adaptec 39320A SCSI Controller" 
4. Select the "Driver" tab
5. Click on "Update Driver"
6. Choose "Install from a list of specific location (Advanced)"
7. Check "Include this location in the search:"
8. Enter the locations where you saved extracted files and hit "Next"
9. Hit next again and then Finish