NAUTILUS,EFI,A03
This is a general maintenance release utility for updating firmware for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.
This is for use on PowerEdge platforms that support UEFI boot mode for SAS and SATA drive updates. Please refer to DOS firmware update utility for older platforms. Current DOS release is A40.
| Release Date: | 11/16/2012 |
| Importance: | Recommended |
| Version: | SATA,A03 |
The following formats are available for the file you have selected
| File Format: | Hard-Drive |
Download File
|
| File Name: |
NautilusA03_ZPE.exe |
|
| Description: | This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation. | |
| Download Type: | HTTP | |
| File Size: | 29MB | |
| File Format: | Rel-Notes-Text |
Download File
|
| File Name: |
readme.txt |
|
| Description: | This file format contains plain text which can be viewed with a standard text editor. | |
| Download Type: | HTTP | |
| File Size: | 30KB | |
Previous Versions
No previous version available.
Description
This is a general maintenance release utility for updating firmware for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.
This is for use on PowerEdge platforms that support UEFI boot mode for SAS and SATA drive updates. Please refer to DOS firmware update utility for older platforms. Current DOS release is A40.
Level of Importance:Recommended
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
Compatibility
| Systems Enterprise Servers M420 Enterprise Servers M520 Enterprise Servers M620 Enterprise Servers M820 Enterprise Servers R320 Enterprise Servers R420 Enterprise Servers R520 Enterprise Servers R620 Enterprise Servers R720 Enterprise Servers R720xd Enterprise Servers R820 Enterprise Servers T320 Enterprise Servers T420 Enterprise Servers T620 Precision T3600 Precision T5600 Precision T7600 | Operating Systems Not Applicable |
Applies to
- Dell SAS/SATA Hard Drive EFI Firmware Utility
Fixes & Enhancements
See attached release notes.
Installation Instructions
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Checksum
To ensure the integrity of your download, please verify the checksum value.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
This is an optional process and is not required for the downloading and installation of device drivers from this site.
|
MD5:
|
a9cfe03f9ad9ec6340c405bda76bb519
|
NautilusA03_ZPE.exe
|
|
SHA1:
|
2ad67e49be9562cb2e46f57792cc5ab3219150e8
|
NautilusA03_ZPE.exe
|
|
SHA-256:
|
41f296d43fcdcf9f17aad18c399efc159aad395e452f1dcd1153cabb433f3386
|
NautilusA03_ZPE.exe
|
My Download List
0
files in my list
Drivers Quick Links